PI SWAP Question

[SN95N/A]

I jus bought a 96 gt yesterday,today after work I bought the PI swap for this car,well it came with the intake which has the coil on plugs to use this do I need to change the computer or how do I make this work or will it work can I get a little help here and can someone fill me in if they have done the PI swap thanks Mike.

[bobtsgt]

if it already has an PI intake then all you need is the heads and cams. can reuse your stock computer. just will need a tune on it. Use the stock coil packs again too. The intakes with the aluminum crossovers are most desired. Will have to tap a hole for the second coolant sensor usually done by the thermostat. I believe the coolant tube out the back of the water pump is a little different but can't remember.

[2000GT]

yea the coolant tube that comes out the back of the water pump is different. on the pi set up in curves down lower to miss the intake.

[cstreu1026]

If you want some more info there is a pretty extensive right up here: http://daytonstangboard.com/forum/showthread.php?t=5822

[94tchikinv8]

Just use your coil packs with the plug wires. You don't have to use the COP system if you don't want, but you can if you want to.

-Rob