Fidanza Aluminum Flywheels repair

[Pops Fun]

I have a used Fidanza Aluminum Flywheel from a different clutch problem. My son told me they could be rebuilt so i called.
Ends up it is a do it yourself repair. Here is how it went.
Bought a kit. $60.00, thanks Craig.
http://i268.photobucket.com/albums/jj22/Popsfun/Car%20Stuff/Repair/th_flywheelKitP1000313.jpg (http://s268.photobucket.com/albums/jj22/Popsfun/Car%20Stuff/Repair/?action=view&current=flywheelKitP1000313.jpg)

here is the flywheel before.

http://i268.photobucket.com/albums/jj22/Popsfun/Car%20Stuff/Repair/th_flywheeloldP1000311.jpg (http://s268.photobucket.com/albums/jj22/Popsfun/Car%20Stuff/Repair/?action=view&current=flywheeloldP1000311.jpg)

Remove the 20 bolts and remove the steel plate.

http://i268.photobucket.com/albums/jj22/Popsfun/Car%20Stuff/Repair/th_flywheelplateoffandboltsP1000314.jpg (http://s268.photobucket.com/albums/jj22/Popsfun/Car%20Stuff/Repair/?action=view&current=flywheelplateoffandboltsP1000314.jpg)

The finished product...

http://i268.photobucket.com/albums/jj22/Popsfun/Car%20Stuff/Repair/th_flywheelfinishedP1000316.jpg (http://s268.photobucket.com/albums/jj22/Popsfun/Car%20Stuff/Repair/?action=view&current=flywheelfinishedP1000316.jpg)

[Mista Bone]

You did use a dab of loctite on the little screws right?

[rmracing]

I would still check it with a straight edge . I replaced my insert and checked and it was still warped a little after I bolted the new unit on , the aluminum had warped a little . I had to resurface the new assembled flywheel to make it perfect again .

[Pops Fun]

I will check it!!