Parse error: syntax error, unexpected '<' in /opt/bitnami/apache2/htdocs/forums/archive/global.php(117) : eval()'d code on line 1
bleeding 2v brakes [Archive] - StangBangerz Forums
PDA

View Full Version : bleeding 2v brakes


SpoonyGT
03-07-2010, 03:14 PM
Had a caliper fail on me and having trouble bleeding the vrakes. The drivers side front failed tried bleeding that but brakes still go go floor. Do I have to bleed all the cakipers and the master cylinder? Is there any order I have to do it in?
onefastcobra
03-07-2010, 03:16 PM
when that caliper failed air got in your lines, so yea you will have to bleed them all, and if it still doesnt feel stiff enough i might even bleed the master cylinder.
nsaniti
03-07-2010, 06:01 PM
I never open up any of my bleeders when doing my brakes. I just open up the cap on the master cylinder before I compress the calipers. Seems to pay off instead of going back and re-bleeding them all when you find out the pedals not right.
5.0calypso93lx
03-07-2010, 10:09 PM
The whole system will need to be bled. You want to start with the caliper furthest from the MC. Car needs to be level. So right rear, left rear, right front, left front.
SpoonyGT
03-08-2010, 07:04 AM
That's what we did RR, LR, RF, LF then master cylinder. Thanks guys.