dizzy help

[Jrcmutang]

well i am putting my windsor down in my 86, going to be carbed, my question is what type of dizzy should i run? I dont want to buy an MSD, i am going to have a MSD box, so looking for somthing i can splice and plug into my box? Any ideas, or any information available? Its a flat tappet cam, i am looking to buy the dizzy from an auto parts store

[mailman]

'67 mustang 289 dist. ($37.99 @ autozone) + pertronix Ignitor.

[Timido]

Good thing about the MSD distributor with MSD Box is it plugs right in

[Rich]

Go to autozone and get one from a 1982 F150 351w. It will have the iron gear for the hydraulic flat tappet cam. The MSD will hook up to it. That's what I'm running. MSD makes an adapter for this also. It is msd 8869. Here is a link...

www.summitracing.com/parts/MSD-8869/

Here is a link to a distributor at autozone...

www.autozone.com/autozone/catalog/parts/partsProduct.jsp?itemIdentifier=700880_0_10500_443 1&skuDescription=Cardone+Reman+/+Distributor&brandName=Cardone+Reman&displayName=Distributor&categoryNValue=&sortType=null&store=741&isSearchByPartNumber=&fromWhere=null&fromString=&counter=1&itemId=30-0&navValue=16200030&filterByKeyWord=&productId=700880&searchText=&categoryDisplayName=Ignition+%28Tune+Up%29&parentId=62-0

[mailman]

Don't follow my above advise- I did not realize that by "windsor" you meant specifically the 351w. '82 f150 351 will be fine.

[Jrcmutang]

Awesome!! Thanks for the help guys!! Hopefully i can have both cars on the road this summer!!!!!