victor 5.0 upper/lower

[93LXhatch]

have a complete victor 5.0 upper/lower intake for a 5.0. comes with a bbk/edelbrock 75mm tb and egr spacer. 600 obo

can be reached at 937-718-3069

[93LXhatch]

Will sell just the intake for 500

[stocknotch]

Thats the best intake out there man...You better keep it!! Bump for ya anyways!!

[Walter]

Thats the best intake out there man...You better keep it!! Bump for ya anyways!!

Please elaborate.

[stocknotch]

Please elaborate.

Nothing to elaborate. Just the truth...You should try it.

[Walter]

Nothing to elaborate. Just the truth...You should try it.

Any testing, dyno sheets or track times comparisons to support your claim? Or just take your word for it. :lol:

[93LXhatch]

Make offers want this stuff gone

[Sloney50]

PM Sent

[stocknotch]

Any testing, dyno sheets or track times comparisons to support your claim? Or just take your word for it. :lol:

Well my turbo car was faster than your turbo car. It went a faster ET and MPH. Your car has better parts all around than mine had, other than the intake...So is that enough proof??? Like I said, you should try one!!

[Walter]

Well my turbo car was faster than your turbo car. It went a faster ET and MPH. Your car has better parts all around than mine had, other than the intake...So is that enough proof??? Like I said, you should try one!!

You sold me! Ordering one now. What did yours run?

[93LXhatch]

Lol pms replied.....deal pending

[black90lx]

You sold me! Ordering one now. What did yours run?

it went 9's on bone stock suspension other than 90/10's in the front but thats all i'm saying. but that could been because adam from cincy speed tuned it too. lol

[Walter]

9's on pump gas is pretty quick.

[stocknotch]

You sold me! Ordering one now. What did yours run?

Mine went a 6.38 @ 110mph in the 1/8th and a 9.94 @ 140mph thru the 1/4. That was with a 1.46 60ft. The pass before that it went a 1.300 60ft and went a 6.30 @ 112 mph in the 1/8th but we shut it down early and coasted thru with a 10.80 @ like 85mph. That was probably a 9.7x pass. That was also when it was only making 550rwhp...when Metcalf got it he turned it up and it made 619rwhp but he never got a clean pass out of it. I'm not trying to be a dick...just stating facts!!!

[stocknotch]

it went 9's on bone stock suspension other than 90/10's in the front but thats all i'm saying. but that could been because adam from cincy speed tuned it too. lol

It didn't even have 90/10's on it then.They were later put on it by Craig

[black90lx]

oh i thought you put them on then when he got it he got all new rear suspension and rearend.

[black90lx]

9's on pump gas is pretty quick.

his was a bone stock factory shortblock never cracked opened. what did your car have in it?

[Walter]

Mine went a 6.38 @ 110mph in the 1/8th and a 9.94 @ 140mph thru the 1/4. That was with a 1.46 60ft. The pass before that it went a 1.300 60ft and went a 6.30 @ 112 mph in the 1/8th but we shut it down early and coasted thru with a 10.80 @ like 85mph. That was probably a 9.7x pass. That was also when it was only making 550rwhp...when Metcalf got it he turned it up and it made 619rwhp but he never got a clean pass out of it. I'm not trying to be a dick...just stating facts!!!

So it was the maroon hatch? Def fast no doubt. Ill put some race gas in mine and see how it does. My 10.18 on pump and dr's put a smile on my face for now.

[Walter]

his was a bone stock factory shortblock never cracked opened. what did your car have in it?

Just srp pistons. The rest is stock.

[black90lx]

i thought you had a 331

[Walter]

i thought you had a 331

Just a 306.

[black90lx]

oh i got ya

[Metcalf Racing]

The gas theory isn't going to work because we bolted the kit on it and backed it on the dyno with no tune and it made 540 the added fuel and it made 550 off the base tune and they stopped. We ran race gas for saftey reasons only. I got the car and had them add timing and it made 6.19 and once again stopped tuning because it was gaining hp to quick. I took it to the track to race my buddy and a injector wire came off. We started arguing and I took it home. We still have the car and its on mixed gas right now. But it only street races if you know anyone who would like to try it. The motor and tune is the same. It now has working suspension :)

[331TwistedWedge]

im a fan of the victor 5.0 ... the lower def needs some machining, but its a hoss of an intake ... take the plenum plate off and open up that small square entry ... its a 65mm, they can go to around 80mm ...

ive read some good articles/dyno comparisons with this intake, it flat out works ... not to mention my car picked up hp, but mainly rpm ... 2 tenths / 3 mph ... its now ported, cant wait to get my new combo together ... i wont be as fast as you big turbo knuckle draggers :lol: but hoping to run a respectable 10.xx ...

[Walter]

Im all for trying one, but I shift @5500. I thought that intake liked the higher rpm's. What machining is needed on the lower?

[331TwistedWedge]

Im all for trying one, but I shift @5500. I thought that intake liked the higher rpm's. What machining is needed on the lower?

mine wouldnt fit down on the heads, stayed up about a 1/4" ... i hear that alot over on hardcore ...

i wasnt dead heading the air, but the ports were not close top to bottom ...

i dont have much knowledge towards turbo cars ... i think your systemax is working pretty good, i'd just stick with it ...

[Metcalf Racing]

I only shifted around 5800

[Metcalf Racing]

I had a ported systemmax on my procharged car and I swear to god if I could have found the money to buy a victor I would have ran it over 4 or 5 times then scrapped it.

[93LXhatch]

bump for pics

[Walter]

I had a ported systemmax on my procharged car and I swear to god if I could have found the money to buy a victor I would have ran it over 4 or 5 times then scrapped it.

Ok if I cant reach my goal with what I got, Ill throw one on in the off season and see whats what in the spring!

[93LXhatch]

ttt....replied to all pms....no one with cash yet

[93LXhatch]

ttt....still got it.....

[93LXhatch]

ok all pms replied again.....i have alot of interest in the intake so im basically making it first come first serve.....first person to bring me 500 cash gets it

[93LXhatch]

bump....

[93LXhatch]

ttt.....500 for everything......upper/lower and bbk/edelbrock tb

[93LXhatch]

bbk/edelbrock tb SOLD......still have the intake(upper/lower) 400 cash

[93LXhatch]

Ttt....

[93LXhatch]

ttt......400 for a victor efi is a deal

[93LXhatch]

400 obo....make an offer i want this stuff gone

[stanginator]

Do all of the vacuums and wires and stuff match up with the victor? Is it plug and play basically?

[93LXhatch]

I'm not sure I've never used it but I would assume so bc it has been used before and a lot of people on here have ran one so I'm sure its fairly simple....smack or metcalf would be the more knowledgeable persons to ask that question

[stocknotch]

Do all of the vacuums and wires and stuff match up with the victor? Is it plug and play basically?

Yeah its a simple swap. Funny you mention it...I just swapped one on a car lastnight. I took a performer off and threw the victor right back on. Should wake the car up quite a bit. Goodluck!

[Walter]

No pcv provision on the lower of the victor 5.0.

[Metcalf Racing]

Nope no pcv. You need to vent the valve covers. But if your car is turbo you shouldn't have the pcv hooked up it should just be open to the atmosphere. If not you could really hurt it

[93LXhatch]

INTAKE IS SOLD!!!!! please lock it up