Foxbody flow tubes on an SN95?

[Stangman]

Supid question I know, But I'm putting single chamber flowmasters on my '94 and adding tailpipes, and Summit has the Flowtech flowtubes for a fox, and they have the Walker/Dynomax individual flowtubes for an SN95 which are longer.

The SN95 flow tubes don't have ANY hardware with them, so an additional 22 buck on top of the 47 just for the flow tubes compared to 42 for the fox tubes with hardware... I'm curious, since I have to add some pipe to make the single chambers work, anyone know if the fox flow tubes will work? (as in, not hit driveshaft or something silly, cuz the bends are slightly different)

Obviously they will bolt up, but wasnt sure if anyone else has used them before... I guess, I will just end up with more room for pipe adjustment for the mufflers.:confused:

[Walter]

Just use the correct ones. Trying to make the wrong ones work will be more of a pain in the ass than 22 bux.

[Stangman]

Well, I'm going to have to add pipe anyway that's just it. In order to run single chambers and tailpipes, I've going to have to add several inches of exhaust tubing on either end of the muffler...

I'm wondering now if getting the correct ones would leave me with little room for error.

I don't know of an exact length difference in the 2 flow tubes either. That would help.

[facemelter71]

Call them.See if they will measure for you.