Dayton Performance 347 complete engine

[draggin50]

Complete engine intake to pan, flywheel to balancer. $4500
DP built and dyno'd 341 hp 381 tq
Will also come with the SCT chip that it was tuned with.
347 cubic inch all forged rotating assembly, 9:1 compression, Trick Flow track Heat heads, Comp ultra gold rockers, custom blower cam, all fairly new and low mileage. Has Victo 5.0 upper and lower Bischoff ported, 75mm TB, 42 lb injectors and matching MAF, Billet flywheel, and much more. I can give you a complete list if needed. Ran a 12.06 @112 in the GT and was very easy to drive on the street. I gave more than this for the long block and flywheel. Great deal!
Also includes Dist. and wires. All complete as seen in the car.
http://i661.photobucket.com/albums/uu339/draggin50/downsized_0220001644.jpg
http://i661.photobucket.com/albums/uu339/draggin50/IMG_0799.jpg
http://i661.photobucket.com/albums/uu339/draggin50/IMG_0836.jpg
http://i661.photobucket.com/albums/uu339/draggin50/IMG_0970.jpg

[orangeconv]

Does it have a stock block?

[draggin50]

Yes it does. but it has a main girdle on it. It lived fine with 600 hp and a Procharger P1SC and E85.

[draggin50]

Complete set up ready to drop in and go... Nobody interested?

[03z06vette]

any trades?

[motox159]

If I was farther along on my stang, would be all over this!

[draggin50]

Here is what all you can get for $4500
Stock block machined by Mike,
Align honed
Decked parallel with mains
Bored and torque plate honed
Coated cam bearings
Brass core plugs
DSS main support (block was align honed with girdle on)
ARP main and head studs
Probe forged steel crankshaft
H beam forged probe rods
Dished .030 forged SRS dished pistons, 9.5 cr
Assembly balanced by Mike to 28 oz
Complete assembly blueprinted
Moly file fit rings
Clevite 77 bearings
Custom grind cam for supercharger application
FRPP roller lifters
FRPP spyder and dog bone kit
TFS pushrods
TFS Track Heat heads, no porting
TFS valve covers, in black
Chrome dual sump oil pan and new pick up
Melling oil pump
ARP oil pump driveshaft
Racemaster balancer
Racemaster billet gear double roller timing chain
New timing chain cover from Ford
New water pump
FRPP hardened cam retainer plate
ARP cam bolt and Crank bolt
Cometic Head gaskets
FelPro gaskets everywhere else
Victor 5.0 upper and lower
BBK 75 mm TB
Comp Ultra Gold rockers 1.6
42 lb injectors and mass air meter
BBK cold air kit
Solid mounts
Spec Billet flywheel
MSD Distributor
Also comes with starter, alternator, and belt. Complete, all you have to do is drop in and go. Will throw in the SCT Chip with it.

[draggin50]

any trades?

What do you got? I can ask him.

[Stangman]

What in the world is the new owner of your old car doing?!?! Is he crazy?? He's selling the whole drivetrain!

[03z06vette]

What do you got? I can ask him.

t-trim, with fuel system, all braded presure and return. sumped tank. 2 carbs.700 and 750. The capri....just do a search with my screen name. tell him to pick 2....lool

[draggin50]

What in the world is the new owner of your old car doing?!?! Is he crazy?? He's selling the whole drivetrain!

He is parting it out. They are worth more in pcs. anymore. Sucks but its not mine anymore!

[Stangman]

He is parting it out. They are worth more in pcs. anymore. Sucks but its not mine anymore!

He's parting the car?????? or just the drivetrain??? If he parts the car he's an idiot!!

[Pitbull1052]

wow that's sad to see a nice car like that get parted.......

[draggin50]

He was going to just part the drive train. I just talked to a guy who is wanting to come get it this weekend complete. So hopefully it stays in 1 pc and goes to a good home. He is the guy I originally bought it from and as soon as he got it he parted it out and I bought the shell. Hope he dont get to do it twice!!

[Stangman]

:lol: Maybe you'll get the shell for another drivetrain! haha

[draggin50]

Dont say that! I got the coupe now and I havent even looked at the 31 lately! Im ready to get it back out and start on it again.

[Stangman]

Just roll that '31 down to my place :D

[draggin50]

Just roll that '31 down to my place :D

That sounds like a good deal! Ill bring it down and you can put it all together for me! I would really like to get it done soon, just to make a daily driver out of it. 5.0 with a C4 and 327 gear in an 8.8. Nothing major really.

[draggin50]

Still for sale!!! Would make a nice ass motor for someone on here!

[draggin50]

Car sold. Please delete.