PDA

View Full Version : Gears & Baseline Dyno next Wednesday!!!


skeptiq
08-09-2010, 01:41 PM
Getting 3.73's put in next Wednesday and getting my baseline dyno pull done so I have a starting point. I wonder what the base pulls are going to be? The anticipation is killing me, I just want to know where I am starting.

Guesses are welcome for the close to bone stocker numbers!

1995 GT Vert: Cold Air Induction, MAC Pro Dump cat back, shorter belt to eliminate smog pump and that's it! It's gonna be weak I know, but in another month, we'll see what it'll do after I get the rest of the exhaust (shorty's and pro chamber) and the cobra intake / TB / MAF / chip & tune done... Should get much better numbers then... hopefully!

Later,
Ben
Stangman
08-09-2010, 02:07 PM
199/258 ask me how I know :lol:
skeptiq
08-09-2010, 03:25 PM
199/258 ask me how I know :lol:

Do tell :D

Ben
Stangman
08-09-2010, 04:38 PM
Mine was 195/257, mostly stock just like yours, lol! I'm running pig-rich because of an uncalibrated MAF. I have a summit cold air intake, 3.73's, dumped flowmasters, and no short belt, I have the stock length belt. You're torque may be a little less, as I have more fuel running thru mine.
skeptiq
08-09-2010, 05:24 PM
Mine was 195/257, mostly stock just like yours, lol! I'm running pig-rich because of an uncalibrated MAF. I have a summit cold air intake, 3.73's, dumped flowmasters, and no short belt, I have the stock length belt. You're torque may be a little less, as I have more fuel running thru mine.

Fair enough! That actually kind of suprises me it would be that high... assuming you are talking about rwhp... Was thinking the CAI and muffs shouldn't add more than 10hp or so and assuming 17% drivetrain loss for AODE, I was going to ballpark it at about 187 rwhp (215 stock + 10).

Guess I'll know exactly what it's putting down in a little over a week.

Ben
Walter
08-09-2010, 05:28 PM
Where are you going to dyno?
skeptiq
08-09-2010, 05:41 PM
Modular Depot.

Ben
Stangman
08-09-2010, 05:46 PM
Ouch! AOD! I have a 5 speed.
skeptiq
08-09-2010, 06:12 PM
Yes... won't be until late next year that the I will get a built trans for it... Need to save up for that while saving for turbo. The stocker will not take the turbo, so gotta drop some coin to get both done at same time.

Just getting foundation stuff done this year. Picking up deals along the way. Always looking for what I need to get the project complete.

Later,
Ben