Anyone know 3v factory rod bearings measure at?

[Predator]

Anyone know what a set of new 3v factory rod bearings measure at? I will be measuring my used ones again, but it would be very helpfull if someone knew where I could find this info. Thanks.

[Blackout]

ask in the 3v tech section at www.moddedmustangs.com . they are really knowlegable about the 3v cars.

[redfirepearlgt]

Nothing in the 05 Ford tech manual specific to connecting rod bearing dia but I have this:

2005 Ford Mustang Workshop Tech Manual (12/2004 edition): Page -303-01B-2 right column 3/4 of the way down the column.

Connecting Rod bearing bore diameter with assembled liners - 2.0885 - 2.0877"

Connecting rod to Crankshaft clearance 0.0009" - .0026" (.024 - .066mm)

I am assuming here that with the clearance value you may be able to measure the crank journal and then measure the ID of the bearing where it rides on the same and do the math to see if the clearance is still within tolerance. ???

[Predator]

Actually that was very helpfull. Thanks guys!!!