many fox parts

[jccox77]

i have many fox parts for sale 87-93
couple sets of quarter glasses $40 a set typical dry mouldings coupes and hatch
marker lights and some headlights $10 each
ten holes with junk tires $15 each
stock hoods $40
have a 8.8 out of turbo coupe disc brake, 3.55 $150
stock gt wings lx wings
professional products 80 mm mass air for 30lb inj with filter mounted on it and i the injectors also both with low miles $350 for both
many other parts available call 859-757-9703 ask for Jeremy

[jccox77]

still have alot of parts

[cagedhatch]

shoot me some pics of the rear end please

[KB1]

What shape are the 10 wholes themselves, do they have center caps?

Thanks

Kevin

[jccox77]

i have about 12 ten holes u can choose from some are rough there are some clean ones left tho and some have caps and some dont i should have at least 6 caps for them i will check

[jccox77]

also have a engine stand for $50
and alot of fox parts

[jccox77]

sale pending on 8.8
mass air meter sold
have a crank and water pump underdrive pulleys for $35
some 85-86 body parts left and alot of 87-93 stuff

[jccox77]

bumpy

[306Power]

This is a shot in the dark but have a Saleen wing for a 87-93 Hatch by any chance?

[jccox77]

i do hve one but it needs 2 studs reserted back in it it is a true saleen wing

[CNTLOSE]

What color are your stock hoods?...I'm looking for a white one.

[jccox77]

i got a black one in good shape i think i have a red one also one white but it needs a little tlc something caught the edge of that one

[jccox77]

8.8 out of thunderbird still for sale $100

[jccox77]

i havea brand new never installed 28 spline auburn mini spool $40
a set of old chrome bbf valve covers $10
old b&m shifter auto $25

[Pitbull1052]

Pic of the saleen wing please

[jccox77]

pitbull saleen wing is pending sorry ididnt post that i will get a pic if it falls thru

[Stangman]

got pics of the old chrome BBF valve covers?

[jccox77]

i have a set of power doors off a 85 with grey door panels i know the power switch is out of hte pass door slight surface rust at bottom seam front nose and rear bumper cover

[jccox77]

jesse i will try and get some pics of those

[CNTLOSE]

What all is needed to put the 8.8 out of T-bird into the stang?

How many miles are on it?

[jccox77]

i know they are a little wider so ur backspacing on the wheels would have to be played with other than that i am not sure u might have to change the master cyl due to it being disc but i am not positive on that and miles unknown

[CNTLOSE]

i know they are a little wider so ur backspacing on the wheels would have to be played with other than that i am not sure u might have to change the master cyl due to it being disc but i am not positive on that and miles unknown

Okay, I will make a post about and see what responses I get. I want to put rear discs on this '88, but buying wheels is way down the road as these pony's have brand new tires on them and money is needed elsewhere on the car.

[jccox77]

someone needs some parts

[jccox77]

i guess no one needs ten holes i will be dismounting the tires and scrapin them

[jccox77]

some pics of some parts

[jccox77]

bump also have a set of pedals still in a 85 for 5 speed and i think i havea a set of auto pedals to gt wing is gone

[jccox77]

deal pending on mini spool and shorty headers

[Stangman]

ever get any pics of the BBF valve covers?

[jccox77]

no i will dig them out and see if i can get some pics in a little bit as soonas i dig my way to the basement

[jccox77]

here ya go jesse not the greatest pic they are just stamped steel chrome and they need cleaned up there is a little surface rust on one but i was told over cleanr will fix that spot

[Stangman]

I'll pass, thanks for the pictures. I will just repaint my powered by ford covers..

[jccox77]

in those pics most of that is dirt i only saw a small half dollar size of surface rust

[jccox77]

last chance on any parts off of the 85 i will be pulling the rear end and control arms and clutch pedals for myself and scraping the rest

[jccox77]

clutch pedal assembly $50 out of fox

[jccox77]

still have many parts updating list
rubber distributor boots $10
front pillar plastic both sides $10 a set
cluster surrounds $10each both styles 89 back and 90 up
still have mini spool 28 spline
still havea gt wing
still ahve q glasses for hatch $40 pair
87-89 grey interior quarter plastic $40
altenator bracket $30
grey door panls 85-86 and a set opel grey out of a 91 gt $50 a set
plastic fuel tank covers $10
still have bbf valve covers a set of stock aluminum ho sb covers
underdrive pulleys
and some ground effect pieces

[89johnny]

How much of the ground effects do you have? And is it all silver? if you have most in silver i want it!

[jccox77]

what u see in that pic i have that but i think that is all i migh have one of the behind the wheel pieces i know one of the side pieces has a small crack in it but it is fixable i will check in the mornin

[jccox77]

1.6 stud mount 3/8 roller rockers $100
8.8 out of the 85 with 4.10 $250
tubular control arms been bolted on no miles silver i think they are upr uppers and lowers $150
clean stock hood $40
red air bag steering wheel $30 pretty good shape
front lower fender extensions cobra style for 87-89 new never painted or bolted on $75

[jccox77]

8.8 sold
still have 2 turbines no caps and a set of 4 turbines with tires that hold air with caps

[jccox77]

i ahve a brand new set of brand new stamped steel valve covers for 302 $35

[jccox77]

some one needs some parts

[jccox77]

chrome 302 valve covers gone

[jccox77]

ubderdrive pulleys sold

[Stangman]

My buddy Robby is excited to get his vert on the road with the stuff he got from ya!

[jccox77]

cool glad i could help Jesse

[jccox77]

updated list CALL 8597579703
red 90 gt red door panels $30
grey 85 door panels $20 no armrest
28 spline mini spool new $40
complete set of turbines with caps tires hold air $70
2 extra turbines $35
2 amercan racin hammers $15
1.6 3/8 stud mount roller rockers $100
red air bag steering wheel $30
front lower fender extensions cobra style for 87-89 new never painted or bolted on $75
rubber distributor boots $10
front pillar plastic both sides $10 a set
cluster surrounds $10each both styles 89 back and 90 up
still havea gt wing
still ahve q glasses for hatch $30 pair
altenator bracket $30
plastic fuel tank covers $10
still have bbf valve covers a set of stock aluminum ho sb covers
and some ground effect pieces
dash harness froma 93 thats what i was told $50
85 lx front bumper cover $50
rear cover 85 $25
da1 computer 88 5.0 5speed ecm speed density
header panel for 87-93 $50
plastic racin bucket seat with seat cover $25 no tracks on it

[jccox77]

radiator hold downs
87 up battery trays
86 back batery tray
wiper motors
stock coils
stock rear springs

[jccox77]

a pillar trim both sides
dash speaker grills
glove box doors

[facemelter71]

Who makes the roller rockers?

[jccox77]

they are orange i beleive they are harland sharps

[jccox77]

parts parts parts

[jccox77]

upr upper and lower control arms new no miles will need hardware $120
2 inch lowering springs $60

[jccox77]

roller rockers sold

[jccox77]

control arms sold

[mustang_gt88]

do you have any headlights for 87-93?