best topend kit?

[cirinoec69]

might just do this. a complete top end kita any good kit brand. maybe some nos on 5.0 100,000 block

[Mustard]

Trick flow heads cam intake. solid combo

[jack90gt]

Trick flow heads cam intake. solid combo

:bigthumb

[1992MustangDW]

wait to the gt-40 people get on here a read this, ur in big trouble mister.

[mustangrfast88]

the edelbrock kit since i am a edelbrock fan but the gt40 is a good setup but you cant get aluminan gt40s

[jack90gt]

the edelbrock kit since i am a edelbrock fan but the gt40 is a good setup but you cant get aluminan gt40s

you can get gt40 y302 or x302 still cant ya??? the holley kit was good back in the day havent heard much about it lately.... i would go with the trickflow kit though..

[RIXXX93GT]

Does that Trick flow kit work with stock pistons?

[jack90gt]

yep it does it is the only one with 202x160 valves that will work on a stock piston...

[cirinoec69]

using afr heads and a custom cut cam wat intke would best match the heads flow rates

[k062693w]

using afr heads and a custom cut cam wat intke would best match the heads flow rates

That would depend on what AFR's, What they flow, your cam specs, And intended use of the car ... Weight, Gear, Etc. all come into play ...

[RIXXX93GT]

The trick flow kit is hard to beat for price and proven gains.

[cobra429boss]

The trick flow kit is hard to beat for price and proven gains.

x2 :bigthumb

[black90lx]

i had trickflow heads, trickflow stage 1 cam, holley systemax 2 intake, 30 lb inj on a stock bottom end with well over 300 passes on it and mine put down 309hp/315tq on my tune and it was never dyno tuned. i strapped it on the dyno made a pull the took it right off. the tf stage 1 cam is my favorite, it sounds good and it is a good street cam.

[jack90gt]

i had trickflow heads, trickflow stage 1 cam, holley systemax 2 intake, 30 lb inj on a stock bottom end with well over 300 passes on it and mine put down 309hp/315tq on my tune and it was never dyno tuned. i strapped it on the dyno made a pull the took it right off. the tf stage 1 cam is my favorite, it sounds good and it is a good street cam.

i had a set of gt40 aluminum heads with an old ass port job and a professional products ported to match the heads and a trickflow stage 1 cam and the car sounded badass and ran pretty damn good..... I love the sound and it pulled pretty good also..

[5.0calypso93lx]

i had trickflow heads, trickflow stage 1 cam, holley systemax 2 intake, 30 lb inj on a stock bottom end with well over 300 passes on it and mine put down 309hp/315tq on my tune and it was never dyno tuned. i strapped it on the dyno made a pull the took it right off. the tf stage 1 cam is my favorite, it sounds good and it is a good street cam.

This is a great combo for out of the box parts to slap on.

[Timido]

Budget combo power for the money is gt40 heads and explorer intake.

[jack90gt]

Budget combo power for the money is gt40 heads and explorer intake.

:bigthumb

[cirinoec69]

got two many options but might go all trick flow or with mix matched im tryin to get 300 at the wheels. street car i can run at strip. has 3.55 gears shorties off road x going to have tail pipes. have cold air just trying to save wat i can but build it. sorry if that sounds stupid

[Timido]

it sounds good. There are many different ways to get the numbers you want. It all depends on what you want to pay and how fast you want it to be. My old 88gt had 300hp 350 ftlbs at the rear wheels with a 5 speed the car ran high 11's and was a Blast to drive on the street.

[black90lx]

got two many options but might go all trick flow or with mix matched im tryin to get 300 at the wheels. street car i can run at strip. has 3.55 gears shorties off road x going to have tail pipes. have cold air just trying to save wat i can but build it. sorry if that sounds stupid

i dont lke the trickflow intakes, thats why i went to a systemax 2. the systemax 2 ports are big without even having to touch them. i never even gasket matched or ported my heads or intake. they were all out of the box and bolted on..

[Whyucryn]

i dont lke the trickflow intakes, thats why i went to a systemax 2. the systemax 2 ports are big without even having to touch them. i never even gasket matched or ported my heads or intake. they were all out of the box and bolted on..

They might have came out of the box at one time...but they were ported before they went on your car. Don't try to lie :)

[jack90gt]

got two many options but might go all trick flow or with mix matched im tryin to get 300 at the wheels. street car i can run at strip. has 3.55 gears shorties off road x going to have tail pipes. have cold air just trying to save wat i can but build it. sorry if that sounds stupid

just make sure you get parts that work together and not against eachother...The trickflow kit is an easy 300hp and you know it will all work together... but in the end it your choice....

[black90lx]

They might have came out of the box at one time...but they were ported before they went on your car. Don't try to lie :)

my heads and intake still had the casting marks in them when i sold the car..... did yours? :eek: