NXcoupe
11-19-2010, 05:30 PM
These are BRAND NEW, they have never been started, it's a long story but another set was bought and installed on the customer's car, and these were sitting in the corner. I come home from the sandbox thinking these were for my renegade car, and well SURPRISE! they're not. I had them coated at asthetic finishers up in piqua, they have been test fitted before they were coated, so any dinks that were needed were done before coating. They fit a 9.5" deck in a fox mustang with Twisted Wedge R heads, SVO N heads, Brodix track 1 X, or Victor2 heads. These are serious headers for a serious engine. They are 2" primaries and 3.5" collectors with the straight 2 3/4" inline bolt pattern.
The headers are 734.57 before coating: http://www.kookscustomheaders.com/show.php?pid=36 and coating was 300 my cost for the headers. So we are looking at 1034.57 I have in these things plus shipping of course.
I am asking 800 for the set since they are NEW.
http://www.daytonstangboard.com/forum/imagehosting/464ce6a99c04a1b.jpg
http://www.daytonstangboard.com/forum/imagehosting/464ce6a99c343c6.jpg
The headers are 734.57 before coating: http://www.kookscustomheaders.com/show.php?pid=36 and coating was 300 my cost for the headers. So we are looking at 1034.57 I have in these things plus shipping of course.
I am asking 800 for the set since they are NEW.
http://www.daytonstangboard.com/forum/imagehosting/464ce6a99c04a1b.jpg
http://www.daytonstangboard.com/forum/imagehosting/464ce6a99c343c6.jpg