Walter
12-10-2010, 02:08 PM
Edelbrock Performer 5.0 heads 60379, 1.9/1.6 valves, ped mount, E-brock 5767 springs 130lb on the seat, new locks and valve seals. Intake runners are untouched but exhaust ports have been cleaned up. Just had em at the machine shop, completely disassembled, cleaned, pressure tested etc. 80miles and 8 passes since then. Taking them off right now.
Also have a set of Crane ped mount 1.7rr's, all bolts pedestals and some shims inluded.
$750 for the heads.
$100 for the rockers.
$800 for both.
Located in Eastgate
Also have a set of Crane ped mount 1.7rr's, all bolts pedestals and some shims inluded.
$750 for the heads.
$100 for the rockers.
$800 for both.
Located in Eastgate