Victor Heads

[93snake]

Up for sale is a pair of Edelbrock Victor Heads (not jr's, these are big bad seniors!) Have some dyno time on them and are ready to go with 5 angle valve job. They are fully ported and flow 397 cfm (intake) and 286 cfm (exhaust) with 2.125 intake/ 1.625 exhaust valves. They have 50cc combustion chambers. Valve springs are 250# open (710# closed). ONLY selling because I have a chance to pick up another set of heads. $1500 and here are a couple pics....
http://pic90.picturetrail.com/VOL2145/12213382/23094322/392812307.jpg
http://pic90.picturetrail.com/VOL2145/12213382/23094322/392812225.jpg
http://pic90.picturetrail.com/VOL2145/12213382/23094322/392812204.jpg
http://pic90.picturetrail.com/VOL2145/12213382/23094322/392812186.jpg

[93snake]

sorry about the delay guys, but all pm's replyed too!

[93snake]

possible deal pending...

[blue89]

Sent ya PM

[93snake]

pm's answered.... info that I didnt put above, 240cc intake/80cc exhaust runner... and as of right now still for sale.

[TONYT]

would you take in a set of afr185 1492's as partial trade and boot

[93snake]

sure will consider any partial, pm me with info and what you have in mind

[bbfstanger]

what rocker setup did you have?

[93snake]

jesel rockers, shaft mounted