PROJECT: SILENT BLUE

[jad0087]

Some of you on here may kno me or have talked to me on here a few times, my names Jared, been on the site for awhile now and never have made one of these so i figured why not...well this is a little history of my car, its an 1989 gt, ive owned it since it was basically stock, just had a gear and a few bolt ons....had a few buddies that were into these and they got me started on the usual h/c/i build so i bought some edelbrock heads, trickflow intake, and custom grind bennett racing cam with all the other goodies to go with it, then i built the rearend with 31 spline moser axles with c-clip elims, auburn pro locker and welded the axle tubes, and put a cage in it, after i ran it like that forever i gotta 306 out of one of my buddies cars, traded the edelbrocks to yougotjunk on here for a turbo and intercooler, and bought some afr 185 comp preps for the 306, put the 306 together with the comp prep 185s and also bought a systemaxx intake for it, didnt use to turbo stuff as of yet so i just sprayed it with a 150 shot, well that got boring so i went ahead and did a turbo kit, had stocknotch from on here build me a turbo kit for it and thats how it sits right now, basically it sits right now with these mods,

afr 185 comp prep heads
systemax intake
custom grind bennett racing cam
stock block 306
t76 masterpower turbo
3550 TKO II trans
31 spline moser axles
cage
auburn locker
UPR tubular Kmember

now for the pics!!!, i dont have really any actual picks of the build cuz i really wasnt plannin on making a build thread, i am going to build a better block for it and get an auto so when that starts happening ill probably take pics of the build for you guys, but for now heres a few pics of how it sits right now, enjoy!!

pics of mockup for turbo kit
http://i483.photobucket.com/albums/rr197/jad0087/imagejpeg952.jpg

http://i483.photobucket.com/albums/rr197/jad0087/DSCN0815.jpg

http://i483.photobucket.com/albums/rr197/jad0087/DSCN0814.jpg

http://i483.photobucket.com/albums/rr197/jad0087/DSCN0813.jpg

http://i483.photobucket.com/albums/rr197/jad0087/DSCN0812.jpg

http://i483.photobucket.com/albums/rr197/jad0087/DSCN0809.jpg

http://i483.photobucket.com/albums/rr197/jad0087/DSCN0779.jpg

http://i483.photobucket.com/albums/rr197/jad0087/DSCN0778.jpg

http://i483.photobucket.com/albums/rr197/jad0087/DSCN0771.jpg

http://i483.photobucket.com/albums/rr197/jad0087/DSCN0774.jpg

[Blowpastyou]

1-remove wire nut on fan wiring
2-install a piece of shrink tubing
3-solder
4-place shrink tubing over joint and warm it...

lol Just fuggin with you, that thing should be fun! Automatic with a turbo will be your new BFF

[jad0087]

http://i483.photobucket.com/albums/rr197/jad0087/IMG00039-20090723-0545.jpg

rough pic of cage, the red sticker says ls1 slayer haha

[jad0087]

1-remove wire nut on fan wiring
2-install a piece of shrink tubing
3-solder
4-place shrink tubing over joint and warm it...

lol Just fuggin with you, that thing should be fun! Automatic with a turbo will be your new BFF

haha ya im plannin on gettin some of the rougher stuff in the engine bay cleaned up real good when i end up doin the next build on it

[babiixoxbritty]

yea that thing is put together like shit. looks like a red neck special. i bet its slow to

[jad0087]

yea that thing is put together like shit. looks like a red neck special. i bet its slow to


coming from the guy who built this for me with the girlfriends username and profile pic ya im sure its slow too haha

[black90lx]

here dick.....

http://www.youtube.com/user/red88gt#p/a/u/0/Q9ZwCNfrIqg

bwahahaha.

[babiixoxbritty]

coming from the guy who built this for me with the girlfriends username and profile pic ya im sure its slow too haha

ha ha, youve blown my cover.

[babiixoxbritty]

1-remove wire nut on fan wiring
2-install a piece of shrink tubing
3-solder
4-place shrink tubing over joint and warm it...

lol Just fuggin with you, that thing should be fun! Automatic with a turbo will be your new BFF

autos are for pussys lol

[Walter]

Looks good. Is the turbo supported off of the front of the cylinder head?

[Jake]

looks sick man! :bigthumb

[jad0087]

Looks good. Is the turbo supported off of the front of the cylinder head?

if u mean bolted directly to the front of the head then no

[Metcalf Racing]

I think he wanted to know if the weight is supported. The answer is yes.

[Walter]

I think he wanted to know if the weight is supported. The answer is yes.

Thanks.

[jad0087]

Ahh I gotcha

[babiixoxbritty]

hes a bit slow. but we accept him

[evil8]

You didn't post your dyno sheet.

[AntiRice427]

I always liked this car. Hopefully you can make it to the cruise in more this year.

[bkstang95]

Nice looking car!

You should start a build thread over on CSS and see how wound up you can get them! :lol:

[jad0087]

hes a bit slow. but we accept him

im very edumacated!

You didn't post your dyno sheet.

its not worthy of posted a dyno sheet when its only on 6 lbs, maybe i will in the spring when i turn up the boost a little haha


I always liked this car. Hopefully you can make it to the cruise in more this year.
ya ive always had to work sundays or my car was down for one reason or another, ill try to make it to the spring one tho


Nice looking car!

You should start a build thread over on CSS and see how wound up you can get them! :lol:

haha oh jeeze, i cant stand it over there to be honest, even when u try to stick up for people they get all pissy

[AntiRice427]

ya ive always had to work sundays or my car was down for one reason or another, ill try to make it to the spring one tho




I mean the cruise in on Friday nights. I think you said you had to work then to most of the time.

[jad0087]

oh ok, ya i work mostly every friday night, sometimes i take off just to go up there tho, i was talkin about the stangbangerz cruise ins haha my bad

[babiixoxbritty]

see i told you hes kinda slow ha ha. j.k. buddy