5.0calypso93lx
05-04-2011, 09:58 AM
:(
As some of you have heard, I've had one of the roughest weeks of my life. Had some personal issues come up and I'm gonna tap out of the car game for a while. I can't get this car built the way I want it and I can't afford to keep throwing this much money at it. After thinking about it over the weekend and talking with the fam, it's time that I move on.
Before looking please read:
-ALL pricing is BEFORE paypal fees
-ALL items are PICKUP ONLY. I work two jobs and with the little free time I have I like to spend at home or near home.
-I am located in NEW RICHMOND, OHIO. It's WAY out on the Eastside near Riverbend and Coney Island.
-Pricing is FIRM as I hate to even have to do this. I think they're fair enough to begin with as most items are new or have little use.
-I cannot hold any items. First person to show up with cash or to pay me for the item gets the item.
-I will be offering everything up locally for the first few weeks to give the locals dibs on the good stuff.
-NO TRADES
-No items have been removed yet. I will be on vacatation for a week starting May 7th, 2011
The best way to get a hold of me is on my cell phone. My number is 513-315-6583. I can send pictures and I do text often.
For starters, pics can be found on my build thread on this forum as well as here:
http://forums.corral.net/forums/general-mustang-tech/1204854-my-stock-351w-blocked-na-turbo-93-hatch-street-car-build.html
Engine
-NEW never fired BES 358 windsor shortblock $2,000
Shortblock Specs:
-1971 351w block bored .030 over
-Stock crank
-Eagle Si-R I beam forged rods with ARP rod bolts
-TRW .030 dished pistons
-Custom spec'd hydraulic roller camshaft for turbo (will give specs to buyer)
-Rollmaster Billet timing set
-All new bearings and freeze plugs
-Will include receipt from BES with all work performed
Trick Flow High Port Aluminum Heads $1100
-Fresh from BES. Disassembled, cleaned, pressure checked
-70cc combustion chambers
-2.02/1.60 valves
-Raised exhaust ports
-NO port work. Good thing in my eyes knowing that no one has screwed them up.
-7/16" ARP rocker arm studs
-Trick Flow guide plates
Scorpion Platinum Rockers $200
-1.6 Ratio
-7/16" stud mount rockers
-These are the better silver, platinum versions. I did research on Hardcore50 for a while and several guys like Ed Curtis recomend these for non-shaft rockers.
-Very light use
Moroso 20520 Steel Oil Pan $200 w/out pickup
-7 quart pan
-Will clear 4 bolt mains on ALL 5 caps
-Oil drain bung welded onto passenger side
-DOES include dipstick. DOES NOT include pickup.
-I will also have the ARP oil pan studs, Felpro 1 piece gasket and pickup available seperately
-New, but mounted up
ATI Balancer $320
-28oz imbalance
-2 piece design for ease of install
-Brand new but mounted up
COMP Cams Hydraulic Roller Link Bar Lifters $250
-Part number 8931-16
-These are the $500+ dollar link bar lifters for using a hydraulic roller cam in a non-roller block
-Lightly used
Trick Flow R Intake $380
-Upper and Lower
-90mm Upper
-351w lower
-Used but in great shape
-Standard R version, not the Box
-PCV valve hole already plugged for use with catch can setup. Can be removed.
Accufab 90mm Race Throttle Body $220 w/out spacer, $250 w/ 3/8" polished throttle bracket spacer
-90mm at the blade
-4" at the TB opening
-Comes with TPS and IAC
-Polished
As some of you have heard, I've had one of the roughest weeks of my life. Had some personal issues come up and I'm gonna tap out of the car game for a while. I can't get this car built the way I want it and I can't afford to keep throwing this much money at it. After thinking about it over the weekend and talking with the fam, it's time that I move on.
Before looking please read:
-ALL pricing is BEFORE paypal fees
-ALL items are PICKUP ONLY. I work two jobs and with the little free time I have I like to spend at home or near home.
-I am located in NEW RICHMOND, OHIO. It's WAY out on the Eastside near Riverbend and Coney Island.
-Pricing is FIRM as I hate to even have to do this. I think they're fair enough to begin with as most items are new or have little use.
-I cannot hold any items. First person to show up with cash or to pay me for the item gets the item.
-I will be offering everything up locally for the first few weeks to give the locals dibs on the good stuff.
-NO TRADES
-No items have been removed yet. I will be on vacatation for a week starting May 7th, 2011
The best way to get a hold of me is on my cell phone. My number is 513-315-6583. I can send pictures and I do text often.
For starters, pics can be found on my build thread on this forum as well as here:
http://forums.corral.net/forums/general-mustang-tech/1204854-my-stock-351w-blocked-na-turbo-93-hatch-street-car-build.html
Engine
-NEW never fired BES 358 windsor shortblock $2,000
Shortblock Specs:
-1971 351w block bored .030 over
-Stock crank
-Eagle Si-R I beam forged rods with ARP rod bolts
-TRW .030 dished pistons
-Custom spec'd hydraulic roller camshaft for turbo (will give specs to buyer)
-Rollmaster Billet timing set
-All new bearings and freeze plugs
-Will include receipt from BES with all work performed
Trick Flow High Port Aluminum Heads $1100
-Fresh from BES. Disassembled, cleaned, pressure checked
-70cc combustion chambers
-2.02/1.60 valves
-Raised exhaust ports
-NO port work. Good thing in my eyes knowing that no one has screwed them up.
-7/16" ARP rocker arm studs
-Trick Flow guide plates
Scorpion Platinum Rockers $200
-1.6 Ratio
-7/16" stud mount rockers
-These are the better silver, platinum versions. I did research on Hardcore50 for a while and several guys like Ed Curtis recomend these for non-shaft rockers.
-Very light use
Moroso 20520 Steel Oil Pan $200 w/out pickup
-7 quart pan
-Will clear 4 bolt mains on ALL 5 caps
-Oil drain bung welded onto passenger side
-DOES include dipstick. DOES NOT include pickup.
-I will also have the ARP oil pan studs, Felpro 1 piece gasket and pickup available seperately
-New, but mounted up
ATI Balancer $320
-28oz imbalance
-2 piece design for ease of install
-Brand new but mounted up
COMP Cams Hydraulic Roller Link Bar Lifters $250
-Part number 8931-16
-These are the $500+ dollar link bar lifters for using a hydraulic roller cam in a non-roller block
-Lightly used
Trick Flow R Intake $380
-Upper and Lower
-90mm Upper
-351w lower
-Used but in great shape
-Standard R version, not the Box
-PCV valve hole already plugged for use with catch can setup. Can be removed.
Accufab 90mm Race Throttle Body $220 w/out spacer, $250 w/ 3/8" polished throttle bracket spacer
-90mm at the blade
-4" at the TB opening
-Comes with TPS and IAC
-Polished