PDA

View Full Version : Termi block ID Help?


Pitbull1052
08-10-2011, 10:12 AM
I think I found the answer to this but just want to confirm it. I found what appears to be a fairly inexpensive termi set up but I don't think it's a Termi block. I don't know if it's good that it isnt or not.... here's the casting numbers I think it's a 93 Mark block but again still not sure.


RF-F2LE
6015-AG/HD


Any help would be greatly appreciated.


B
orangeconv
08-10-2011, 11:21 AM
Mark are aluminum, termi is steel let's start there
Pitbull1052
08-10-2011, 11:31 AM
the motor isnt local so i'm going off of pictures and it's hard to tell from the pics.
Pitbull1052
08-10-2011, 11:38 AM
It has a PCM of 3R3A-12A650-YA and it also includes the CCRM 1R3F-12B581-AA
SCHMUCKINGHAM
08-10-2011, 12:18 PM
It has a PCM of 3R3A-12A650-YA and it also includes the CCRM 1R3F-12B581-AA

Is the block silver or dark brown?
Pitbull1052
08-10-2011, 12:25 PM
I'm trying to post the pic but it keeps telling me the upload has failed it does not look silver like aluminum but it's not dark brown either it's kind of dark dark gray like graphite or something maybe
Pitbull1052
08-10-2011, 12:26 PM
I'm pretty sure it's a 1993 Mark block which again i don't know if that's a good thing or a bad thing...... I'll prolly just pass on it being as it's going to be hard to identify
05yellowgt
08-10-2011, 03:13 PM
A 1993 Mark block is a Teksid and is plenty strong if prepared correctly. Will save a ton of weight up front.
chris91
08-10-2011, 03:25 PM
After searching around thats definitely a part number off a Mark VIII block.
Pitbull1052
08-10-2011, 04:22 PM
A 1993 Mark block is a Teksid and is plenty strong if prepared correctly. Will save a ton of weight up front.





So what's prepared correctly? and I guess i'm not exactly positive of what i'm looking at. He states that it's compete but he bought it for a project and hasnt fired it up yet.