Parse error: syntax error, unexpected '<' in /opt/bitnami/apache2/htdocs/forums/archive/global.php(117) : eval()'d code on line 1
who wants to install subframe connectors [Archive] - StangBangerz Forums
PDA

View Full Version : who wants to install subframe connectors


phatford
08-11-2011, 08:51 PM
I got a set. I am located in Monroe. Any local muffler shops or who??
Blackout
08-11-2011, 10:12 PM
If you have a muffler shop do it, make sure they set up the mig welder so they don't burn holes.
Moody
08-12-2011, 02:21 AM
have you contacted zimmers performance fab.... hes a vendor on here he welded some stuff for me and did a hell of a good job...
phatford
08-12-2011, 07:01 AM
they are on! thanks
Kevin1989
08-12-2011, 10:30 AM
who did your and how much was it?
phatford
08-13-2011, 10:20 AM
myself on jack stands...free. I just had to grow some balls and it turned out great.
Kevin1989
08-13-2011, 10:46 AM
myself on jack stands...free. I just had to grow some balls and it turned out great.

i dont have a welder thats why i asked.
djom1cincy
08-13-2011, 07:28 PM
Not bashing but isn't that the wrong way to do it? I've been told you want a drive on lift so the car sits in its normal state when welding them in. When lifted on a jack stand or four point they can torque the frame. Once welded like that the frame is out.
Kevin1989
08-18-2011, 04:12 PM
Not bashing but isn't that the wrong way to do it? I've been told you want a drive on lift so the car sits in its normal state when welding them in. When lifted on a jack stand or four point they can torque the frame. Once welded like that the frame is out.
i was told if you put 2 on the rear axel and 2 on the front control arms the suspension is loaded as if it were sitting on the ground. when i get around to doing mine im just going to get 4 roll up ramps and let the car sit on thoes.
Gstang117
08-18-2011, 06:15 PM
Kevin if you need a second set of ramps let me know I might be able to get you some for a day.
91boost
08-18-2011, 09:59 PM
who did your and how much was it?

Take it to zimmers you wont regret it.
phatford
08-22-2011, 06:48 AM
I could not get my front end to sit right on jackstands. I have some large retaining wall bloaks that I put a piece of wood on that held up the front end. I did it the right way. all the weight on the wheels just like a driver on life.
phatford
08-22-2011, 06:49 AM
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/293188_10150339877576942_646051941_9384801_3448574 _n.jpg
phatford
08-22-2011, 06:51 AM
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/205830_10150339876361942_646051941_9384786_3668029 _n.jpg