HCI cars dyno numbers & track times

[cobra429boss]

just wondering , i am going to just skip the gt40 and get alum heads either the trickflow tw heads or afr 165-185's, post up some numbers and combos , Thanks guys

[NXcoupe]

Most make in the 300 rwhp range, which depending on weight will get you at the 12.0 mark in a fox with slicks.

[Kevin1989]

I'll keep my mouth shut on this one Hahaha

[Markcore]

95 Cobra
Trick Flow TW heads
TF stage 2 cam
TF Track Heat U/L intake
308

318rwhp - 12.5x but the trans was jacked.

[blown96cobra]

Mike is rt. Usually around the 300whp mark. Depending on weight I've seen 11.80s in a coupe and 12 teens in a gt with no sway bars and slicks. Some people swear by the afr heads but I love the Trickflow heads.

[superstangOH]

There are many factors to running good numbers. It should make 300hp to 330hp with a good tune. I would go with some twisted wedge heads and depending on you set up i would probably just go with a E303 cam. Good idle and all around just god cam for the street. Maybe some bbk shorties you can find that cam and them headers for cheap on here or CL....

[Gearhead]

There are many factors to running good numbers. It should make 300hp to 330hp with a good tune. I would go with some twisted wedge heads and depending on you set up i would probably just go with a E303 cam. Good idle and all around just god cam for the street. Maybe some bbk shorties you can find that cam and them headers for cheap on here or CL....

Personally I'd avoid the E303 cam, way better cams out there today. E-cam design is from over 20 years ago....

TF stage 1 is ok if you're on a budget.

[blown96cobra]

Personally I'd avoid the E303 cam, way better cams out there today. E-cam design is from over 20 years ago....

TF stage 1 is ok if you're on a budget.

I agree I'd run a bcam before I'd mess with an ecam

[cobra429boss]

What about the anderson cams , the car will be gettin a turbo this winter

[NXcoupe]

Anderson cams can work well depending on the combo. I talk to Rick occasionally if you want a recommendation from him on which cam to go with send me your combo and future plans for it.
Unless you are running stock style cast iron heads, stay away from letter cams completely.

[jad0087]

i have a custom grind bennett racing cam in my car and i like it, its not even ground for afrs that i have and it still runs good

[juiced347]

Anderson cams can work well depending on the combo. I talk to Rick occasionally if you want a recommendation from him on which cam to go with send me your combo and future plans for it.
Unless you are running stock style cast iron heads, stay away from letter cams completely.

you sir have a pm :bigthumb

[flyin2jz]

A nxcoupe Rick hasn't worked at Anderson in over year. Lol

[mad max]

^ I guess that means he forgot anything he learned while working there ?