Parse error: syntax error, unexpected '<' in /opt/bitnami/apache2/htdocs/forums/archive/global.php(117) : eval()'d code on line 1
WTB/clutch setup for 5.0 [Archive] - StangBangerz Forums

PDA

View Full Version : WTB/clutch setup for 5.0



mwaller5672
09-05-2011, 07:38 PM
I need a clutch setup for a 5.0 and the price of a transmission if you have one.
Mike

Blackout
09-05-2011, 07:52 PM
what size flywheel?

mwaller5672
09-05-2011, 08:47 PM
I don't have anything

mwaller5672
09-05-2011, 09:33 PM
Will this stuff normally come with a motor. I thought it did. The motor was disassembled and I thought it was in the boxes.

Blackout
09-05-2011, 10:17 PM
Sometimes. You need to find a 5-speed flywheel (i see a pilot bearing in the pic) . You should be able to find one for around $50.

mwaller5672
09-05-2011, 10:21 PM
This might be a dum question but I have an 85 5.0 set up for an automatic. Would the fly wheel be the same as a 5 speed

Blackout
09-05-2011, 11:14 PM
Nope. If your wanting an automatic trans you will have to pull out the pilot bearing, if you go five speed, leave it be. The flywheels also usually have different size bolts.

jccox77
09-06-2011, 12:10 AM
are u for sure its a 85 engine

mwaller5672
09-06-2011, 06:36 AM
What size is the most common fly wheel. I will see if someone on here has one. When I put 85 I meant the motor year. I checked tghe motor numbers.

mwaller5672
09-06-2011, 07:07 PM
This is a 10.5 inch clutch setup. 50 oz. I need everything. Inspection plate and all