97 NPI 4.6 car motor

[Dirtyd0g]

Motor from my thunderbird. Runs good. Because of the nature of the beast I suggest valve seals while it is out but it did not appear to burn any oil or leak. Has a little over 125,000 miles on it. Being pulled for upgrades.
I can install too if needed. I would like to keep the thunderbird specific parts but it isn't critical let me know what you are putting it in and I will make sure you get what you need to make your project work.
$200 firm, open to trades let me know what you got. I would love to get into reloading.
call 513 eight nine eight fifteen eighty or text 513 five thre five seventy one fifty three.
email alan at dirtydogperformance dot com
Alan

[orangeconv]

I have someone that's interested, get back w you soon

[Dirtyd0g]

Broke the nipple on the intake removing the hose. It was setup for a PI intake so it has the late pipe nipple on it already. Really don't want to make room to store it but I know it runs good so I don't want to scrap it either. New price $175
Alan

[Dirtyd0g]

Forgot to mention that the motor has PI cams already installed and the front and rear seals have been recently replaced. It has about 2000 miles on it since the cam install and reseal of front cover,and rear cover. Motor ran great I just pulled it to put an aluminum block motor in.
Alan

[orangeconv]

Still have allen? Is it romeo or windsor?

[Dirtyd0g]

Romeo motor, I took the cams out but I have stock to put back in or as is $100. Still a complete longblock with thunderbird specific parts removed.
Alan

[Dirtyd0g]

I have another one of these coming out this week that needs some work. Being sold as a core motor $100 for the long block.

i also have another complete good motor from oil pan to intake from a thunderbird with just over 100,000 miles on it. I was going to use it to get my old 95 going but decided to put 2 cars together and make one good one instead. $250 for that one complete.
Alan

[06V6Andrew]

i would get the long block but right now i have no truck.

[Dirtyd0g]

Chris still has to pull it out of the car, he is about halfway through pulling it but it is on the outside lift and it keeps raining. Realistically it won't likely be out until sunday. The complete motor is out and ready to go I just have to unbolt the trans from it.
Alan

[06V6Andrew]

i will see if i can borrow a truck this weekend or next.

[Dirtyd0g]

You want the core motor or the good one?
Alan

[06V6Andrew]

the core...i am going to build it form the ground up

[Dirtyd0g]

Both motors are ready for immediate pickup I have to go to columbus early tomorrow and don't mind meeting near the highway.
Alan

[Dirtyd0g]

Bump doing some pre winter cleanup. Still have the complete 96/97 motor. For someone looking for a stock replacement the deal can't be beat. I will guarantee the motor if I install it and I am running a winter labor special until feb15th. $250 for that motor.
The core motor is out and ready to go first $75 takes it.
Alan