Parse error: syntax error, unexpected '<' in /opt/bitnami/apache2/htdocs/forums/archive/global.php(117) : eval()'d code on line 1
Question about oil dip stick hole [Archive] - StangBangerz Forums
PDA

View Full Version : Question about oil dip stick hole


2000GT
10-06-2011, 01:03 PM
I got put a 7 qt. pan on my motor and it came with a dip stick mounted on side of it. I was wondering what u guys did to block hole where the stock dip stick went thuogh the block. Just curious
mustangboy
10-06-2011, 01:11 PM
If it is threaded like they usually are, just get the right size pipe plug. You can get them from any local hardware store. If it is not threaded you may need to weld it shut if you have no plans of using it.
2000GT
10-06-2011, 01:26 PM
Yea there no threads
Pitbull1052
10-06-2011, 01:51 PM
If it is threaded like they usually are, just get the right size pipe plug. You can get them from any local hardware store. If it is not threaded you may need to weld it shut if you have no plans of using it.



^^^^^^
What he said in a pinch at the track once i used a screw and some high temp rtv it held even when the motor didnt lol
draggin50
10-06-2011, 05:40 PM
I've cut the stock tube and welded it closed and just put it in.