1991 Mustang LX Drag Car

[ponyexpress91]

OVER $50k INVESTED. MUST SELL. MAKE OFFER NEVER RACED


327 STROKER ENGINE

Dart Iron Eagle block
Eagle forged pistons and crankshaft
Eagle H-Beam connecting rods with L19 bolts
Clevite bearings, Cometic head gaskets
Brodix Aluminum Track 1 M2 ported heads, 68cc chambers, 2.080 I, 1.600 E
Competition Cams custom grind turbo cam
Canton rear sump aluminum oil pan with Melling oil pump
Pro-Turbo 76mm turbo with Tial 48mm wastegate and 50mm blowoff valve
Brodix tall aluminum valve covers
Crane roller timing set
AFI dampener
Moroso Crankcase Vacuum pump

DRIVE -TRAIN

Tremec TKO 600 5 speed manual transmission
Syn-R-G clutch and flywheel
Lakewood bellhousing
Strange chrome moly driveshaft
Moser pinion and transmission yokes
Ford 8.8 inch rear with 9.00 inch flanges
Richmond 3.73 ring and pinion with full spool
Strange 35 spline axles
MAC aluminum rearend cover with girdle.

AIR / FUEL DELIVERY

Aeromotive rear sump fuel tank, 11104 fuel pump, 600 pph @ 45 psi, fuel pump controller, regulators and filters.
Accufab 90mm throttle body and TPS
96# fuel injectors
EFI Spyder intake

SUSPENSION

UPR full race 4 link rear, tubular K-member, C/C plates, torque boxes, subframe connectors, and coil-overs
5 lug Cobra spindle conversion
Wilwood disks front and rear with 4 piston calipers
Strange 10 way shocks and struts
Anthracite Gray Bullitt Wheels, 15x9 Rear, 15x8 Front
BFG g-Force TA Radials front and rear

ELECTRICAL

Accel DFI Gen VII+ fuel management system with wide band
MSD Blaster coil, 3-Step, and 7 AL2
Accel Dual-Synch distributor
MSD 8.5mm plug wires
Innovative MSBC-1 boost controller
NGK spark plugs
Autometer gauges

SAFETY

5 point 3 inch safety harness
10 point mild steel rollcage

EXHAUST

2.5 inch FlowTech Stinger exhaust with Warlock mufflers and bypass dumps

[2Fast4You]

Put some photos up, I would love to see it.

[jad0087]

what would you take for the motor if you parted it out?

[5.0calypso93lx]

Dang Andy, haven't seen you in FOREVER. Didn't even know you still had this car. I will vouch this thing is stupid clean.

[ponyexpress91]

I have had some health challenges, moved, and got much more involved in the farm.
Just no time for cars.
Not looking to part it out. If I did I would have to get at least $20k for the motor, turbo, ecu, and tranny. I really don't want to be left with a carcass.
That would be a last resort.
Pics coming.

[facemelter71]

Off subject.

Do you like the hood lift shocks that I see in the pics? Are they worth it?

[ponyexpress91]

Hood shocks are great. The fiberglass hood is very heavy vs stock.

Buy the car........the hood shocks come free:D

[facemelter71]

You didnt put a price on it. Unless I missed it.

[redfirepearlgt]

Now thats a car I could die in! Dag! SWWWEEEEET! Bet it can remove the wrinkles from your face by the 60ft mark.! LOL! Sure wish I was in the market for such a nice vehicle.

[ponyexpress91]

I didn't put a price bc I don't know what I'll take. I need to sell it. Obviously ridiculous offers will be ignored. I've probably have close to $60k in the car.
It probably will go for $25k. I don't race it, and don't need it. But haven't felt the need to donate it yet either. One way or another, it will go.
Very sad.........really great car, built with the best of everything.

[duststang]

wow very nice.

[Pitbull1052]

Off subject.

Do you like the hood lift shocks that I see in the pics? Are they worth it?




I love my hood lift shocks no stupid prop rod in the way etc........ worth the money for sure.


Great looking coupe glws

[bkstang95]

I will also vouch for this car. It has the best of the best parts.

Good luck with the sale Andy! Haven't seen or heard from you in a while...how have you been?!

[ponyexpress91]

Can't seem to get this car gone.
Doesn't anyone think it's worth $25k?
I did take it to a few shows out east....that was fun.

[chris91]

Have you tried listing it on nation wide websites like Corral, Yellowbullet, SVTPerformance, etc? Im willing to bet you'd have a lot more luck spreading it around those sites.

[45133Stanger]

very good looking car man1

[Walter]

Can't seem to get this car gone.
Doesn't anyone think it's worth $25k?
I did take it to a few shows out east....that was fun.

Nice car but its a hard sell for 25k.....

[cobraman302]

I will give my opinion here to hopefully try and sell the car for you.

I see no mention of how the car started life...is it an original 5.0 5 speed car? What the interior like? If it's no nice, can you provide under carriage pics to show truely how nice it is? How about mileage on the car? has it been repainted or is this an original condition car? What kind of power is this car putting down?

It's kinda sad to say, but if you yanked the motor and trans, sold it, put in an 03-04 cobra drivetrain, the car would bring $20k easily. For some reason people love these fox bodies, especially clean coupes, with 03-04 Cobra drivetrains. Even if it does make less horsepower... I think your car has just been taken too far to aven get 1/3rd of your money back. I'd say it may be an $18-$20k car. Just my opinion though, and much more information and pics are needed to drum up the attention you need to sell a '91 LX for that coin. Beautiful car from what I see though.

[TooFast98Cobra]

nice ride, did you have any dyno numbers?

[ponyexpress91]

It was a 5spd 4cyl car painted red.
It has 500 miles on the re-build.
Original car had 60k I think when I bought it 7-8 years ago.
It has never even been in the rain!!

What more can I say. We all make mistakes.

First Best Offer over $15k buys it. :(
Very Sad Day.

[ojsherbergt]

I may have someone interested in it , if i can talk him into it , he just spent a lot of money on a pullin truck , not including the 8000 dollar trailor he bought for it.. I will let you know. Post it on yellowbullet or racing junk . someone will give you 16k-20k for it..

[ojsherbergt]

what do you think the car would put down on a dyno ?

[ponyexpress91]

It made 490 rwhp with 94 octane and 10# boost during the tuning stages.
Should make 800+ with 22# and C16 I would think.

[ponyexpress91]

Maybe I should part it out.

Any offers for the big pieces?

[1baddlx]

Maybe I should part it out.

Any offers for the big pieces?

Wanna sell it as a rolling chassis?

[5.0calypso93lx]

Put this on corral, yellowbullet and racing junk with a really detailed, well-written ad. It'll sell.

[mustangboy]

And get current dyno #'s. If you want good money you need to show the car can make big power reliably and consistently over several dyno runs. It would be money well spent to help get it sold for the big money you want out of it. Guys will spend a couple grand and take a chance on an unkown but for a car the caliber of yours they want reciepts, time slips, videos, dyno sheets build pics or anything that can show them they are spending their money wisely. Good luck with the sale

[cobraman302]

I think the car speaks for itself, and I think it would sell on another site (SVT Performance or Corral) for $15k'ish. BUT, you need a good amount of pictures and a couple of videos to get people off their computer chairs...

Let me know if you want help with taking some good pictures of the car out in the great weather we have this week. I can line something up, and take videos of it running as well. I wouldnt part the car out, I think it will sell even if winter is close...

[Maximus]

And get current dyno #'s. If you want good money you need to show the car can make big power reliably and consistently over several dyno runs. It would be money well spent to help get it sold for the big money you want out of it. Guys will spend a couple grand and take a chance on an unkown but for a car the caliber of yours they want reciepts, time slips, videos, dyno sheets build pics or anything that can show them they are spending their money wisely. Good luck with the sale


I think the car speaks for itself, and I think it would sell on another site (SVT Performance or Corral) for $15k'ish. BUT, you need a good amount of pictures and a couple of videos to get people off their computer chairs...

Let me know if you want help with taking some good pictures of the car out in the great weather we have this week. I can line something up, and take videos of it running as well. I wouldnt part the car out, I think it will sell even if winter is close...

Good points. Hell, for $40 Ill strap it down on my Dynojet and give you a couple pulls. Ill even post it on my FB page for him also.:)

[5.0calypso93lx]

That's pretty cool Craig. Andy is good people's.

[ponyexpress91]

All great suggestions. Car is tucked away in my garage about an hour outside of the city. I'll see how timing works out if I can get it out and into town before winter sets in.

[draggin50]

PM sent!!!

[ponyexpress91]

Looking to sell the entire engine and drive train as one.
Under 500 miles on engine. About 200 miles on clutch and flywheel.

Will sell rear with Richmond full spool 3.73, 35 spline axles with 9" flanges done by Bischoff at a later date.

Any interest let me know. Putting a crate motor in it and use as a weekend driver.

[draggin50]

Is this still for sale complete?

[ponyexpress91]

Yes, as of today.

[1baddlx]

That would be a nice one for ya brian

[draggin50]

Ive been looking at some nice 03/04 Cobra's but I love the fox body's! Ill send a pm.

[ponyexpress91]

Someone is coming Sat to take it home (they say).
I'll let you know if he doesn't take it.

[draggin50]

Sounds good. Good luck with sale. I don't really need another one now that I have 4 sitting around but you cant ever have to many I don't think!

[ponyexpress91]

Guy can't come for 2 weeks.
1st 15k takes it home.

[NXcoupe]

So did this sell?

[ponyexpress91]

Nope....it became a sale with way too much drama.
I finally told him the car wasn't for him.

[Kevin1989]

I wish I had money I'm in love with this car

[Gongshow]

Put that baby on the bullet.

[ponyexpress91]

Drained the gas, added fresh and started it up and ran it around a bit last week. Sounded so great I fell in love all over again........for now.
Need to lose the spool though. Too bad nobody males a 35 spline diff.

[chris91]

So you want us to lock her up or leave it around in case you get an offer?

[ponyexpress91]

Still for Sale
Now also has custom painted aluminum front skinnies.
Will throw in a $1200 ecu for a NA engine up to 800 hp, and assorted other parts.
Not looking to sell parts or pieces.
Thanks.

[ponyexpress91]

No longer for sale. Decided to change the axles to 31's and put in a posi or air locker to make it a daily driver.
Wish I had put in 33's instead of 35's. Then I could find an LSD without buying new axles.

Richmond 35 spline full spool for 8.8" and 35 spline 9" axles for sale soon.
Brodix heads and other parts still for sale.

[2Fast4You]

Would have been nice to have some photos when this went back up for sale, it may have motivated some interest.

[ponyexpress91]

I know. had a difficult time posting them.
All is good. I'll make a fun street car and not lose $40k...... for now!

[ponyexpress91]

Selling again. Life has thrown my family a curve ball and it has to go.

[Maximus]

$15k but no pics...

photobucket.com is stupid simple. Even I can upload and paste pics on forums using that site.:bigthumb

[TooFast98Cobra]

Im interested. Send me pics please . 412 651 1920

[ponyexpress91]

Craig, how about I message them to you and you post them.
Glad to see you haven't lost your sarcasm as you got older. Lol.

[Maximus]

Craig, how about I message them to you and you post them.
Glad to see you haven't lost your sarcasm as you got older. Lol.

There was no sarcasm there. How do you expect me to show pics of your Mustang to potential buyers, without pics? Serious, Photobucket (or other Free hosting sites) make it SIMPLE to upload and post pics.

BAM! It took me longer to type this sentence then to post this pic...
http://i775.photobucket.com/albums/yy39/CincySpeed/gunfighter_2_by_davidwpaul-d37xbp8_zpsslakd2ic.png (http://s775.photobucket.com/user/CincySpeed/media/gunfighter_2_by_davidwpaul-d37xbp8_zpsslakd2ic.png.html)


WOOT! Heres another one...
http://i775.photobucket.com/albums/yy39/CincySpeed/10247505_10202977653736548_6616455906092111749_n_z psbc8e5913.jpg (http://s775.photobucket.com/user/CincySpeed/media/10247505_10202977653736548_6616455906092111749_n_z psbc8e5913.jpg.html)


Oh snap. I just looked at your original posting year, 2011. You are definitely not in a hurry to sell. :lol:

[mustangboy]

What is the current running condition of the car? Is it turn key ready to drive?

[mustangboy]

More info please. Can you send me pics to mustangboy@zoomtown.com What is the current running condition of the car? Did you ever swap axles/diff? When was the last time the car ran? What wheels and tires come with the car? What extra parts are included?

[chris91]

I'm guessing this is the car?

https://cincinnati.craigslist.org/pts/5593119766.html

[draggin50]

Yep that's it. I was gonna post it up earlier but Im not smart enough to do so from my phone!

[86gt40]

http://i92.photobucket.com/albums/l11/86gt40/IMG_4664_zpsdoyquukz.jpg (http://s92.photobucket.com/user/86gt40/media/IMG_4664_zpsdoyquukz.jpg.html)

- - - Updated - - -

http://i92.photobucket.com/albums/l11/86gt40/IMG_8121_zpsgjjtz8tb.jpg (http://s92.photobucket.com/user/86gt40/media/IMG_8121_zpsgjjtz8tb.jpg.html)

- - - Updated - - -

http://i92.photobucket.com/albums/l11/86gt40/IMG_9687_zpsjjcfsupx.jpg (http://s92.photobucket.com/user/86gt40/media/IMG_9687_zpsjjcfsupx.jpg.html)

- - - Updated - - -

http://i92.photobucket.com/albums/l11/86gt40/IMG_0007_zpsrdnaklkz.jpg (http://s92.photobucket.com/user/86gt40/media/IMG_0007_zpsrdnaklkz.jpg.html)

- - - Updated - - -

http://i92.photobucket.com/albums/l11/86gt40/IMG_0610_zpsrnjncqzx.jpg (http://s92.photobucket.com/user/86gt40/media/IMG_0610_zpsrnjncqzx.jpg.html)

http://i92.photobucket.com/albums/l11/86gt40/IMG954213_zpswja1rbyp.jpg (http://s92.photobucket.com/user/86gt40/media/IMG954213_zpswja1rbyp.jpg.html)

- - - Updated - - -

http://i92.photobucket.com/albums/l11/86gt40/IMG954209_zpsylpmrxds.jpg (http://s92.photobucket.com/user/86gt40/media/IMG954209_zpsylpmrxds.jpg.html)

http://i92.photobucket.com/albums/l11/86gt40/IMG954211_zpski2kw2ea.jpg (http://s92.photobucket.com/user/86gt40/media/IMG954211_zpski2kw2ea.jpg.html)

- - - Updated - - -

http://i92.photobucket.com/albums/l11/86gt40/IMG954214_zpsffrthcu4.jpg (http://s92.photobucket.com/user/86gt40/media/IMG954214_zpsffrthcu4.jpg.html)

[ponyexpress91]

Pics are up. Axles etc never changed. Ran today.

[ponyexpress91]

SOLD