t5 bellhousing

[96GTAnthony]

im gonna swap a 5.0 into my 96 v6 stang it has a t5 in it and i was wondering would i need a 94 95 bellhousing to fit or would 87 to 93 bell housing work people say the input shafts are diffrent and some say it will work just fine???

[blown96cobra]

Your better off finding a 94-95 bell housing or you'll have to trim down the input shaft to use a fox bell.

[Goober]

You need to run the correct bell for the transmission. the fox stuff is 5/8" shorter and has the clutch fork clocked in a different position.

[96GTAnthony]

alright thanks if anyone knows where i might be able to get a 94 95 5.0 bellhousing let me know thanks for the help

[700hp04mystic]

thats not true if u have a fox tranny use fox bell if u have a 94 up tranny v8 or v6 use a 94-95 bell. u just cant use a fox tranny with 94-95or vice versa.

[96GTAnthony]

ok Thanks thats very helpful

[NXcoupe]

I may have a 94/95 bell, have to look tomorrow.

[full force]

don't cut input shaft... no way... if you cant get right bell, you can locate and change to a fox input shaft..

[96GTAnthony]

all right just let me know if you do and thanks for the help