331 Mexican Blower Motor and P1SC

[TurboNG]

Gauging interests in selling:

331CI Prob PRO series 800HP rotating assembly in a Mexican Block Fully assembled and ready to go. Blower Cam. Timing cover to the oil pan- dished pistons for a blower/turbo set up..... I have all the specs and part numbers out with the motor call for details. Motor has not been started yet (brand new from machine shop) $2800.00

Also have a Spider EFI intake with elbow $800.00

Also might be selling a Polished P1SC ProCharger with blow through MAF, 60lb injectors, Front mount Intercooler, all the piping, blower and mounting hardware, tuning chip for ECU. ect ect..... Set up has under 2k miles on it. $2,500.00

937-765-0207

[Jrcmutang]

CAN YOU POST UP PICS?

[TurboNG]

Yea i'll write up all the details and parts as well tonight when i get home

[TurboNG]

Well i wish i could edit instead of reposting it all again,

I forgot to mention that the Spyder intake is polished, and is brandnew not used, only bolted on the motor.

Blower= Polished P1SC2, 8lb pulley, crank pulley and bracket, polished Tile Style V/S Racing Blow Off Valve, 3'' blow threw MAF calibrated for 50lb injectors, 50lb R/C flow matched injectors, Front mount innercooler, also comes with everything to run it with out the front mount, also comes with chip with tune already on it for this blower and boost level. Well over 3k bucks worth of whoppass! Setup has less than 2k miles on it.

The 331 Mexican Short Block Probe-Ford 331 Reverse Dome -20.1cc - PRO STREET Engine Kit, 3.250" Stroke, 800HP kit All ARP hardware including the ARP Head Studs. Main Girdle and Canton 7quart Oil Pan. Timing chaine/gears set is new, balancer included...... Cam is Comp Blower Hydrological CAM 224/232@50 - 286/294adv - 556/559 lift
also comes with new Copper Head Gasket
http://www.probeindustries.com/Ford_331_Reverse_Dome_20_1cc_Pro_Street_Kit_p/11938-ps-f331.htm

[TurboNG]

Not letting me post pics can some one post them for me, give me you're email!

[heatmup]

I may be interested in the pro charger. E-mail me pics at jweaver@leeinc.com

[TurboNG]

Picture finally! :bigthumb

[Jrcmutang]

What heads are you running?

[TurboNG]

It had Avengers on it, none right now, I have a set of trickflow TW for sale also

[Jrcmutang]

Would performer rpms with 2.02/1.60 valves work

[TurboNG]

Yea should

[TurboNG]

The pistons are relieved for a straight valve design, not twisted wedge, but since the CAM is 224 duration any heads should work with out issues even the twisted wedge

[Jrcmutang]

cool, ill think it over

[TurboNG]

Its about spring time and this would be a nasty set up!

[TurboNG]

Still have!

[juicedfoxbody]

Cash price . Bottom doller for it all call me 9375099303