advice adjusting roller rockers?

[WARNOTCH]

Seems like everyone I ask has a different answer. What is the correct way? If it matters mine are 1.6. Thanks.

[Blowpastyou]

hydraulic roller-find the base circle on whichever one your working on, tighten to zero lash, 1/2-3/4 turn to set preload,and lock.

[CNTLOSE]

hydraulic roller-find the base circle on whichever one your working on, tighten to zero lash, 1/2-3/4 turn to set preload,and lock.

I have heard 1/4 to 1/2...so I say go with 1/2 and you should be good. :D

[WARNOTCH]

Ya I'm just gonna do a half.

[lxenvy]

hydraulic roller-find the base circle on whichever one your working on, tighten to zero lash, 1/2-3/4 turn to set preload,and lock.

So r u saying tighten it this much or loosen??? Just asking. I backed mine off 1/2 turn is y im asking

[WARNOTCH]

http://www.youtube.com/watch?v=piifbQtCzno&feature=youtube_gdata_player
I found this before I made this thread. But he dose a full turn, I always thought that would be to tight.