k member install

[TONYT]

i just started to swapout my stock kmembr,and found that the nuts up front had been put in crossed threaded,so can they be purchased locally or is there another quick but good fix,

thanx for any and all input

[bobtsgt]

they are metric so you may have to go to a fastenal to get them. nuts are nuts.

[700hp04mystic]

yea u can get them from fastenal and i would use a big washer under them.

[TONYT]

kewl didnt know if i needed the fancy nut holders that are on them

[700hp04mystic]

no u will be ok there, i had to cut mine off once and done the same thing just a nut and a big washer.

[5.0calypso93lx]

If you wanna make it really easy teamz sells a k member bolt kit. Are you talking the factory brackets inside the frame rails that are threaded? Can't really find those at a hardware store.

[700hp04mystic]

they r not brackets they r a nut with a clip that hooks on the edge that keeps them from spinning.

[5.0calypso93lx]

The rear bolts absoltutely use a bracket with two threaded holes. They're the factory calypso color of my car so I know they're oem.

[700hp04mystic]

he didnt say the rear bolts he ask about the front ones.

[5.0calypso93lx]

Good point