any know where

[zlou363lx]

i could find an inline fuse holder with 10ga leads that will handle a 40amp fuse? i need a new one for the fans on my truck, and i cannot find an autoparts store that stocks them. would like to pick one up tomorrow if possible. i live in goshen and will be up in middletown tomorrow. so somewhere between the two would be awesome:bigthumb

[Rick93coupe]

Check out parts express if you have one in your area.

http://www.parts-express.com/wizards/searchResults.cfm?FTR=inline+fuse+holder&search_type=main&WebPage_ID=3&searchFilter=inline+fuse+holder&x=0&y=0

[capri5.0]

Check your local car audio shop

[mustangjon]

Check your local car audio shop

Was going to say the same

[Blackout]

Check out parts express if you have one in your area.

http://www.parts-express.com/wizards/searchResults.cfm?FTR=inline+fuse+holder&search_type=main&WebPage_ID=3&searchFilter=inline+fuse+holder&x=0&y=0

When I found out that they were in my backyard and what they carried, I was like a kid in a candy store. They sell alot of stuff and its a very reasonalble prices.... Example: I just bought a 33ft HDMI cable from them for $16... I can't touch them for less than $15 for a 6ft cord.

I recommend everyone jump online and see what they have.

[1987coupe]

napa part #784674 has 10ga wire but it says 30amp and it takes a maxi fuse

[zlou363lx]

Check your local car audio shop
i hadn't thought of an audio shop. thanks


napa part #784674 has 10ga wire but it says 30amp and it takes a maxi fuse

thank you:bigthumb

[Katmandu]

Check your local car audio shopOr make your own like I did.

I had (2) 12v 50AMP fuses to run my 1400 Watt Mobile Linear setup for my CB in my car. No joke. :cool2:



.

[DSSKing68]

Actually if you are set on running a 40 amp fuse you should be running at least an 8ga wire, if you are running it in a 12V system.