So I set my dash on fire.......

[Gstang117]

P/O did a hack job on the Fog lights and I may have bumped one loose causing the wire to fall onto the standard driving lights which in turn short circuited and went up in smoke. I'm in the middle of rewiring it, but I noticed that my turn signals do not work. I have already checked the fuses and all of them are fine. Does the headlight switch need to be in for it to work? The wipers and pump on the turnsignal switch are in working condition.

[06V6Andrew]

i can say that i had a truck that some how the speedo dash wire and the headlight power some how melted to each other, once i fixed that nothing every worked right again.

[Gstang117]

Well this being my DD I plan on fixing it no matter what.. I need to have them up and running.

The hazard lights is also working if it helps.

[mustang_gt88]

I had to rewire my 82 and the headlights did not affect my turn signals. It sounds like the switch. I hope you get it fixed

[Gstang117]

Thanks, it really scared the piss out of me when I saw smoke coming from my dash.
Think I will try to get the relay behind the fuse box and replace that.

[jktruckin06]

on my 87, alot of lights did not work, the problems were in the multi-function switch aka turn signal doo-hicky

[mustang_gt88]

on my 87, alot of lights did not work, the problems were in the multi-function switch aka turn signal doo-hicky

lol doo-hicky

[jktruckin06]

dood, i need pics of da chinese thing!

[Gstang117]

Any way to test this turn signal doohicky? :lol:

[mustang_gt88]

Get a test light and see which lines are hot and reference the wiring schematic