92 GT Rollbar, Suspension, Race/Street

[NXcoupe]

NEW PRICE! See post below----Ive got this 92 GT, it's got a wolf anti-roll bar on it. It has to the windshield cowl, with dzus fasteners, and sheet metal wing out back. Wheelie bars, and a parachute that is removable. Has weld wheels, painted to match on front, 8" out back with 28 X 10.5 slicks, and MT frontrunners on the skinnies. Was set up for an auto and blower, has fuel cell, battery in trunk. Trick voltage gauge in tailight so when you turn on the power switch, the gauge tells you the battery's voltage so there are no surprises. Has aftermarket gauges and tach, the stock stuff was removed. It now has stock front suspension, stock rear suspension and a stock 7.5 to roll it around on. Has stock computer and EFI wiring harness, subframe connectors, driveshaft loop, etc. Paint is in great shape and shiny, car is not rusty. Interior is black with custom door panels and a switch for windows to go up and down, and a lever to open door, rear seat delete. Very trick setup. 6 point rollbar, race seats, fire extinguisher, console switch panel, helmet hook, etc. I'm asking 3500 for it as it sits, obo or mustang trades(keep your bikes), If you are interested in any of the parts on it, PM me, don't post questions here please. If you want any other pics, just post up and I'll host them and get them up here.
http://www.daytonstangboard.com/forum/imagehosting/464ff22aeeaf409.jpg
http://www.daytonstangboard.com/forum/imagehosting/464ff22aeecc8cd.jpg
http://www.daytonstangboard.com/forum/imagehosting/464ff22aef12b79.jpg
http://www.daytonstangboard.com/forum/imagehosting/464ff22aeee9d38.jpg

[jad0087]

i almost traded for this car awhile back, guy said it had a older lightning motor in it?...was that true?

[NXcoupe]

yes, it was. It was a roller motor. I sold that a while back. I'm going to start stripping everything else out of this soon, the roller will be for sale a lot cheaper. Very nice car once I looked it over, got alot of cool little tricks to it.

[Bman]

Not to hijack your thread. But that has the same paint scheme as my coupe!

[NXcoupe]

Not to hijack your thread. But that has the same paint scheme as my coupe!

That's why I always chuckle when someone says 'I want my stang to be different', lol, it's probably already been done. I like the paint, bet your coupe looks sweet with that scheme.

[Bman]

The colors are flipped. There is a pic of it in the paint section. Good luck with the sale.

[orangeconv]

hey i stopped by the other day for the steering shaft and couldnt locate them. when will you be around mike?

[NXcoupe]

Did you come during our business hours? I'm here all day tomorrow.

[orangeconv]

What are your hrs? It was 130 on tuesday

[NXcoupe]

4 to 6 Mon Tues, Thurs, Fri, and Sat 10 til 2 every other sat. It's posted on the front window open sign and in my dayton performance section in the vendors area as well. Sorry you wasted a trip, and its wierd you didn't find anyone here since Dave was here all day Mon, Tues, Thurs, and Yesterday.

[orangeconv]

My bad i had to go to the coroners office for work so i just stopped by i will come this week one day

[NXcoupe]

My bad i had to go to the coroners office for work so i just stopped by i will come this week one day

We are closed this week. Ill be there next sunday all day. Sorry this has been hard for us to meet up.

[Yellowstang]

how much for the parachute

[NXcoupe]

Ok, new price is 3600 with the wheels, no chute, no wheelie bars, stock kmember, power rack, stock upper and lower control arms, interior is still untouched. Still has the good front brakes and spindles that were on it.

[NXcoupe]

how much for the parachute

150, and that includes the mount, the part that you slide out of the tube welded to the body. I'll throw in the retaining pin that holds it in too.

[slow86fiveoh]

Could u snap a couple pics of the interior and engine bay, thanks

[NXcoupe]

Will do. Have to be tomorrow.

[NXcoupe]

Finally got the pics, sorry for the wait.
http://www.daytonstangboard.com/forum/imagehosting/4650170338c1694.jpg
http://www.daytonstangboard.com/forum/imagehosting/465017033861e5d.jpg
http://www.daytonstangboard.com/forum/imagehosting/4650170338aa7ba.jpg

[NXcoupe]

double post for some reason....

[NXcoupe]

A few more:
http://www.daytonstangboard.com/forum/imagehosting/4650170338932b5.jpg
http://www.daytonstangboard.com/forum/imagehosting/4650170338d8093.jpg
http://www.daytonstangboard.com/forum/imagehosting/46501703387b664.jpg

[NXcoupe]

Still for sale....

[jktruckin06]

If they want to trade door panels let me know!

[NXcoupe]

I will convey that to him, but I think he's diggin how it is as is. That car will make a killer street machine.

[NXcoupe]

Still for sale. Guy's work is talkin lay-offs, don't blame him for holding off. I'm putting this on Corral, racing junk, and Yellow Bullet tonight. It won't last long.

[NXcoupe]

I'll take 3500 for it with the chute as it sits now. Clean title, will take a payment plan on it, have other parts that could be purchased as well.

[Goober]

Damn, $3500 is stealing this!

[cyah92]

Good looking car. Can't believe u still got it

[NXcoupe]

Thanks guys, dropping to 3300 on it. Wheels are for sale separately, as is the chute and gauges, etc. I'd like to move this, willing to take a payment plan with some money down.

[RyanR]

you have a pm

[NXcoupe]

Sorry Ryan, Chute is sold. 3200 now. It'll keep going down as more stuff sells off of it. I want it to go to someone that wants to do something with it.

[NXcoupe]

3000 for this, somebody come get this from me.

[45133Stanger]

bump for a nice looking car

[45133Stanger]

just curious how much for the slicks... and what kinda battery? and how much for tach?

[45133Stanger]

didnt see gauges were gone

[NXcoupe]

Gauges are still there, wheels and tires 500. I'm going to leave the gauges in it.

[NXcoupe]

2900. .........

[NXcoupe]

OMG 2500 come and get it.

[Goober]

that's just giving it away

[NXcoupe]

I know, but I just want it out from under my feet. It's a stangbangerz special price.

[facemelter71]

Trade for a Saturn? Or 86 F250?

[Kevin1989]

Hood price? Could replace it with one if we could make a deal.

[NXcoupe]

Trade for a Saturn? Or 86 F250?

At this price? I'm just wanting cash, sorry.

[NXcoupe]

Hood price? Could replace it with one if we could make a deal.

I don't know, it's held on by dzues fasteners, so what hood do you have to go on it?

[Kevin1989]

I don't know, it's held on by dzues fasteners, so what hood do you have to go on it?

I have a cervinis ram air, I just want that set up has a factory latch. Would need painted obviously but I have cash for everything you got on there

[NXcoupe]

I don't know, I think at this point I'd rather keep whats left together and just sell it.

[Kevin1989]

I don't know, I think at this point I'd rather keep whats left together and just sell it.

Okay, no problem.

[2Kblacksleeper]

If somehow you have this in march or April, I'll take it. I know you'd like to sell sooner though.

Free bump.

John

[45133Stanger]

free bump.....

[NXcoupe]

If somehow you have this in march or April, I'll take it. I know you'd like to sell sooner though.

Free bump.

John

Thanks, might be working a deal on it. But if i still have it then, get with me.

[NXcoupe]

Sold it!....

[jktruckin06]

congrats!!! ya do pretty good today?

[NXcoupe]

Didnt set up today. I think if I did, Id of done ok. Did excellent yesterday, howd you do?