PDA

View Full Version : 87 GT Vert



jktruckin06
07-28-2012, 09:48 PM
I want to sell all the stuff I have, either as a package or part out. Don't really care. It is a pretty rust free 87 GT vert. I will sell everything listed below for 5,000 bucks firm.

87 GT Vert with canyon red front seats, front carpet, dash, console and door panels. No rear interior. Car is "primered". Top works manually. some pumps and cylinders there. Decent black top with decent weather stripping and busted out back window. Maximum Motorsports weld on subframe connectors. - 1,000 dollars

Motor is a Coast High Performance 306 Street Fighter shortblock. Forged internals. F cam. E-7 heads with some work done "not by me" and cobra 1.7 roller rockers. ARP head stud kit. Stock oil pan, wrinkle red "powered by ford" valve covers, Edelbrock Performer RPM carb intake and newer Edelbrock 650 Thunder carb with manual choke. AED throttle cable bracket and new throttle cable. Chrome Edelbrock air cleaner. Ford OE distributor with MSD cap. MSD 6AL. Ford Motorsports plug wires with thermo-tec plug boot heat shields. March Performance alternator bracket and idler pulley. PA performance 3G alternator. New OE water pump. New "cobra" starter with thermotec wrap - 1750 dollars for intake to oil pan, complete running motor.

Or, 1,000 for the shortblock, 250 for carb, 75 for throttle cable bracket and cable, 100 for intake, 200 for heads and roller rockers, 100 for alternator, 175 for alternator and bracket, 100 for idler, 100 for 6AL, 125 for starter and wrap.

T5 complete with bellhousing zoom clutch, b&m ripper shifter, clutch quadrant, new cable and firewall adjuster. Needs seal up front. - 500

MAC Longtubes in good shape, dr. gas x pipe and MAC 2.5 inch before axle dumps. - 300

Near new Flaming River Manual Rack quick ratio and forged true steering shaft. - 350

New 4 lug rotors, calipers and pads. - 80

Newer aluminum replacement radiator. - 100

Sumped fuel tank $150, aem? stainless inline filter $80, holley blue pump and reg $80, 20 total feet of earls braided 8an $120, 3 - 90degree fittings $30, 4 - straight fittings $30, 6an jumper from reg to carb with 2 - 45degree fittings $20, 8an to 6an with fuel pressure gauge $25. Have some insulated clamps and stainless self tappers too. 400 for everything

4 lug weld draglites. 3.5 inch up front with ok tires, 8 inch out back with ok 265-50-15. also a pair of 10 inch wheels with never ran 28x10.5 M/T et drags. No centercaps, all lugs and washers. 600 bucks

8.8 rear end with new shoes, wheel cylinders and frpp 4:10 gears. - 250 bucks

Accel trunk mounted battery box $50, Interstate Megatron $75, battery cable from solenoid to trunk, ground from battery to trunk, ground from trunk to
inner fender and motor $75. - buy it all for 150 bucks

UPR single adjustable lowers. 100

MSD Digital Multi Retard. - 100

Edelbrock water pump. - 50

MSD wires. - 25

Florida 5.0 6 gauge cluster with turn signals and brights. - 150 bucks
Auto meter phantom tach. - 100
Auto meter phantom oil pressure w/ copper tubing kit p/n 5721. - 75
Auto meter phantom volt and fuel. - 50
come get it all for 300 bucks

Used performer rpm aluminum heads with 3/8 inch studs, guideplates and springs good to .575... these are the 2.02 intake. - 815

brand new comp cams ultra gold aluminum roller rockers. - 250

arp intake stud kit - 60
arp exhaust stud kit - 60
arp valve cover stud kit - 60
2 tubes arp assembly lube - 10
come get it all for 150 bucks

There is probably some other knick knacks I'm forgetting about. Hit me up anytime for pictures or questions, on here or by phone. I will try and get some pictures up, but my laptop is down.

I'm John, car is located in Sharonville. Would trade for random shit plus or minus cash. If parting out, kinda need to do things in a certain order. Just let me know 513-390-3614 thanks

mustang_gt88
07-28-2012, 09:55 PM
i might be interested in he only fue system

jktruckin06
07-28-2012, 10:25 PM
Let me know man. There's some other fittings in there I just can't remember them lol

mustang_gt88
07-28-2012, 10:47 PM
I will call you tomorrow and we can talk, i think i have a guy who wants the carb

mustang_gt88
07-28-2012, 10:48 PM
wow i just read what i had typed earlier, must of been on the pipe lol, what i might is whole fuel system

jktruckin06
07-28-2012, 11:10 PM
haha, i was wondering. just let me know. these heads would be pretty dope too!

mustang_gt88
07-28-2012, 11:16 PM
yes the heads would be sweet

NaomiDstangLvr
07-29-2012, 01:46 AM
Might be interested in the rotors etc. I know mine need replacing lol! I'll let my husband know about your post..

KB1
07-29-2012, 07:17 AM
It would be a shame to tear your car apart after all the work you put into it, however I understand, been there!

GLWS.

Kevin1989
07-29-2012, 07:55 AM
Will you sell just the calipers and pads?

jktruckin06
07-29-2012, 08:35 AM
Kevin if Naomi doesn't come through then yeah

jktruckin06
07-29-2012, 08:55 AM
It would be a shame to tear your car apart after all the work you put into it, however I understand, been there!

GLWS.

If you see anything you would like let me know. I don't want to step on Jon's toes but I like that volvo

jktruckin06
07-29-2012, 03:02 PM
Also I know money is tight. I will take PayPal and eat the 3% if helps facilitate a deal.

cyah92
07-29-2012, 05:18 PM
R the wires 8mm

jktruckin06
07-29-2012, 05:42 PM
I believe the ones on it are. The msd wires are 8.5

jktruckin06
07-31-2012, 11:57 AM
Alright lock this one up. I'm buying a roller and dropping this damn vert like a bad habit. If anyone needs body panels, canyon red interior or some limited vert top parts let me know.

Pitbull1052
07-31-2012, 12:10 PM
what ya buyn?

jktruckin06
07-31-2012, 02:35 PM
Hoping for the roller from 91lxnos.

Pitbull1052
07-31-2012, 02:40 PM
nice nice.......... that's a pretty nice one too

jktruckin06
07-31-2012, 02:55 PM
Yeah It looks awesome. I'll know this weekend hopefully

Pitbull1052
07-31-2012, 03:04 PM
hell yea post up if you get it

jktruckin06
07-31-2012, 03:07 PM
Will do. Both cars will be going to Dawson for a good ole switcharoo.

jktruckin06
08-09-2012, 07:49 PM
Anybody have interest in this as a 5 lug roller? SN95 four wheel disc 5 lug. I believe they are new edge wheels with 50% nitto drag radials in the back and 90% kumhos up front.