can a 408 10/1 compression engine push into the tensaa

[cyah92]

Any help would b nice.

[Bman]

Nitrous fixes everything. With the right combo anything can happen.

[cyah92]

All engine

[331lx]

Seen less cubes on that compression go 10s, ask kennebellcobra he done it several times on smaller engines..

[331lx]

Having the right h/c/I will make or break it..

[cyah92]

Thanks for the feed back. Doing this for a buddy. Wants to get in the tens but wants to run 93 octane with this engine.

[NO SHOT]

My 408 had 28cc dished pistons and 58cc afr 205's with a nitrous cam went 11.20's n/a Around 10 1/2-1 hope that helps :D full weight 86 hatch c/4 390 gear

[TurboNG]

My 349 runs 10.30@130mph in a 5-speed NA
With a 408 It should run 9.30s LOL

[RIXXX93GT]

Quite a few n/a cars on the dozen doing it.

[full force]

I had a carbed N/A 306 with unported Y heads ran 11.60's so a 408 would easily do it with the right combo all day long, faster if you really pick parts right..

[2Fast4You]

Let me shed a little light on the combo and anybody with positive inspiration is more than welcome to chime in. It is a 9.5" deck height 351W, bored .030, decked, -22cc forged dished pistons, weight matched & balanced rotating assy, Lunati retro fit hydraulic roller cam in the .580's area, out of the box 60cc Victor Jr's (heads), Ford Motorsport intake, Scorpion roller rockers, 750 Holley DP, complete MSD ignition.

[rmracing]

My n/a 310 has been 10 teens with 10-1 compression.

[Goober]

Stick or auto? Internal or external balance? Gear? Race weight?

[Buckeye]

We will see, gonna shoot for it with my 10-1 393w come spring

[dr59l]

I can't see y not my. 040 351w foot braking 2200 hit hi 6s 1/8th mi n/a on a 275/60 Mickey. Swapped in a tko an w a slick will probably be even deeper. That's a hi 10 on a lot less

[Timido]

My pump gas 408 went high 9's 10.15-10.20 all day long in the heat.

[2Fast4You]

If anyone is willing to share some of the tricks and traits of there 10-second engine builds please share, you can even PM them to me as well. Just really trying to help a buddy out that has never been able to build an engine like this before. I have some knowledge on engine stuff but always willing to learn more.

Thanks