devous1
03-19-2013, 04:44 PM
Let me say first I only intend to sell one of these motors.
Motor out of my AB Mach
This motor was sitting with the valve covers off, the previous owner apparently had an issue and had someone start to take the motor apart. They only took the passenger side valve cover off, then attempted the drivers side and couldn
't get it past the master cylinder. I have taken it down to the shortblock and see no pison issues or valve issues. A few of the cam lobes have scaring or pitting on them. I believe the main problem was a timing chain tensioner was jamed and one of the plastic guides broke off and allowed the chain to go slack and rub on the aluminum part of the guide. This motor has approx 63k on it and is complete from intake to exhaust but is disassembled.
Looking for $1600
Motor out of my TR Mach
This motor is about as good as it gets without buying a new crate motor. Approximately 20k on it and is also complete from intake to exhaust.
$3500
Both motors are out of autos.
Motor out of my AB Mach
This motor was sitting with the valve covers off, the previous owner apparently had an issue and had someone start to take the motor apart. They only took the passenger side valve cover off, then attempted the drivers side and couldn
't get it past the master cylinder. I have taken it down to the shortblock and see no pison issues or valve issues. A few of the cam lobes have scaring or pitting on them. I believe the main problem was a timing chain tensioner was jamed and one of the plastic guides broke off and allowed the chain to go slack and rub on the aluminum part of the guide. This motor has approx 63k on it and is complete from intake to exhaust but is disassembled.
Looking for $1600
Motor out of my TR Mach
This motor is about as good as it gets without buying a new crate motor. Approximately 20k on it and is also complete from intake to exhaust.
$3500
Both motors are out of autos.