SCT Big Air Question.

[rtvickers]

I have a BA2400. After a quick google search it says its 90mm. Im assuming that's the size of the housing? Im looking at a BA3000 90mm housing. Just because its pretty and mines ugly/plain. So if the housings are the same, shouldn't I be able to just put the BA2400 sensor in the BA3000 housing? And if the housings are the same is the only difference between the two in the parameters of the sensors? I know nothing about MAF systems other than a simple install. Hopefully you guys/gals can shed some light on the situation. Thanks

And another quick question. Is there a specific distance the MAF should be installed from the TB? Ive seen some at the TB and some in a CAI in the fender. Does it make a difference? Thanks again.

[SN95N/A]

I know from experiance that my Maf Is very sensitive in my car for some reason,I do NOT mess with mine but I hope someone can give you some good advice on this.

[facemelter71]

It all has to do with resolution. Do not mess with putting one sensor into another housing,that spells bad news.

[Adam@S&MMotorsports]

I have a BA2400. After a quick google search it says its 90mm. Im assuming that's the size of the housing? Im looking at a BA3000 90mm housing. Just because its pretty and mines ugly/plain. So if the housings are the same, shouldn't I be able to just put the BA2400 sensor in the BA3000 housing? And if the housings are the same is the only difference between the two in the parameters of the sensors? I know nothing about MAF systems other than a simple install. Hopefully you guys/gals can shed some light on the situation. Thanks

And another quick question. Is there a specific distance the MAF should be installed from the TB? Ive seen some at the TB and some in a CAI in the fender. Does it make a difference? Thanks again.

I do not believe the electronics have the same bolt spacing. ;)