Parse error: syntax error, unexpected '<' in /opt/bitnami/apache2/htdocs/forums/archive/global.php(117) : eval()'d code on line 1
3 angle Valve Grind [Archive] - StangBangerz Forums
PDA

View Full Version : 3 angle Valve Grind


PKFIRE
10-06-2013, 02:10 PM
Is much material taken out during a 3 angle valve grind? Also does the valves recess much more into the head?
Adam@S&MMotorsports
10-06-2013, 09:24 PM
Is much material taken out during a 3 angle valve grind? Also does the valves recess much more into the head?

They shouldn't as long as you use a reputable shop. Also if it is an overhead cam motor whatever was removed from the seat usually needs to be removed from the valve tip.
PKFIRE
10-06-2013, 11:14 PM
They shouldn't as long as you use a reputable shop. Also if it is an overhead cam motor whatever was removed from the seat usually needs to be removed from the valve tip.

Performance Engineering, I'll be stopping there tomorrow. I just want to make sure that I can shim the head with shim range that they make for the Volvo head.
Adam@S&MMotorsports
10-07-2013, 02:44 PM
:eek: hopefully everything works out. I usually use Barker Machine & Fab or BES.
PKFIRE
10-07-2013, 06:15 PM
I'm sure it will be fine. What I'm having done isn't too extensive and they have a lot of heads they're working on which is a good sign. Sounded like Eric owner??? knew what he was talking about when I talked to him today. I've installed cams before but head work is pretty new to me.