93 hatch no more interest 5,000

[jktruckin06]

I have a 93 hatch with all the upr suspension, k member and a arms. Near new manual rack, 5 lug disc front and back. Race star/Greg weld uni lug drag stars with new mickeys up front. Rci fuel cell. New Holley blue, 20 feet of earls braided with a bunch of earls fittings. Harwood hatch with wing and lexan. Harwood cowl hood. Lx front and rear bumpers. Black stripped dash. Kirkey seat with grey cover and racecraft mounting. Msd 6a. Florida 5.0 cluster with phantom gauges. Autometer vent cluster. Arc 8 relay kit with switch panel. C.h.p. 306 all forged internals with brand new Anderson n61, edelbrock aluminum heads, performer rpm air gap intake, Holley 750, all march pulleys and alt adjuster, 3g alt. Eddy water pump. K&n air cleaner. Ford motorsports tall valve covers. Crane gold 1.6 rockers. Proper msd dizzy for carbed roller motor. T5 trans with b&m ripper. Aluminum radiator with flex a lite fan with built in thermostat. 8.8 with 3:73 welded tubes... Strange 10 ways in rear. Good headlights and tail lights. Body has welded in subframe connectors. Skinny kid manual brakes with AN bulkheads and fittings. Ssbc proportioning valve.

513-390-3614 John.

[jktruckin06]

There is all kinds of stuff on this car. Someone can make some money parting it out I would think. I just don't have time or room, if I did I would finish it

[TurboNG]

I'm interested

[jktruckin06]

Turbo, hit me up, come look at it.

[jktruckin06]

http://www.stangbangerz.com/forums/showthread.php?t=81581

The motor was just disassembled, tanked, honed, New bearings and the Anderson cam.

I just bought the seat from Eddie and the bracket hasn't even been delivered from racecraft.

If someone wanted to get it running, it is real close. Like finish making a couple fuel lines and brake lines. Wire in the starter, alternator and ignition.

[thecollector]

Don't do it:eek:

I think the lack of fried food is getting to you back away from the protein shakes and think this thru.

[TurboNG]

ill take a look at it. phones dead right now..

[jktruckin06]

ok, this is about to get parted out here is a list and prices for now

--------------------------------------------------------------------

upr k member, a arms, coilovers and caster camber plates $750ish new - 500 -

flaming river manual rack and steering shaft - 300 -

5 lug disc front - 100

15" Race star/Greg weld uni lug drag stars with new mickeys up front - 800 -

Rci fuel cell 12 gallon - 200 -

New Holley blue fuel pump $130 new - 100 -

40 feet of earls braided 8an with a bunch of earls fittings - 400 -

Harwood hatch with aluminum wing and lexan window - 400 -

Harwood cowl hood - 100 -

Lx front bumper - 100 -

Lx rear bumper - 100 -

Black stripped dash and console - 150 -

Kirkey seat with grey cover - 150 -

racecraft seat mount for kirkey - 100 -

Msd 6a - 80 -

Florida 5.0 cluster with phantom gauges - 300 -

Autometer vent cluster with 2 5/8 clock and 2 /58 mechanical fuel pressure - 150 -

Arc 8000 relay kit with switch panel $300 new - 250 -


Coast High Performance 306 forged internals with brand new Anderson n61 - 1500 -

cam was just $320 + $120 for Motorsports lifters + $350 to have disassembled, cleaned, reassembled with new bearings


edelbrock performer rpm aluminum heads 2.02 intake 1.60 exhaust $650ish new each - 1000 -

performer rpm air gap intake $275 new - 200 -

Holley 750 - 220 -

march pulleys, alernator adjuster and idler pulley with arp crank and water pump bolts - 200 -

3g alternator - 120 -

Edelbrock water pump - 80 -

K&n air cleaner - 60 -

Ford motorsports tall valve covers - 100 -

Crane gold 1.6 rockers - 220 -

msd dizzy for carbed roller motor - 220 -

T5 trans with b&m ripper - 600 -

stock replacement Aluminum radiator with flex a lite fan with built in thermostat $300ish new for fan alone - 250 -

8.8 with 3:73 gear, welded tubes and disc brakes - 300 -

pair of Strange 10 $75ea new - 100 -

Good headlights - 80 -

lx tail lights - 60 -

Skinny kid manual brakes with AN bulkheads and fittings - 250 -

Ssbc proportioning valve $90 new - 80 -

scott rod black cowl panel $50 new - 40 -

[jktruckin06]

93 fenders in good shape - 100 pair -
donathen racing chromoly front and rear bumper supports - 100 -
doors with windows, some wires cut or missing - 100 -

[SLWB16hatch]

Where are u located?

[TooFast98Cobra]

I'll take the sr cowl panel when your ready.

[jktruckin06]

Sharonville now. Will probably strip it in Dayton.

The cowl panel is new, let me know how you want to get it. It can be brought to the swap.

[1baddlx]

Interested in the cluster and fiberglass hatch setup ....how many miles show on cluster and will u send pics of both to my phone?in other words dibs on cluster and hatch and wing

[1baddlx]

And pics of the other gauge setup too plz 513 805 9390

[SLWB16hatch]

Pics of the seat, kmember setup, rack, and donathen bumper supports to 5134351614 when u get the chance sir. Thanks

[TooFast98Cobra]

Sharonville now. Will probably strip it in Dayton.

The cowl panel is new, let me know how you want to get it. It can be brought to the swap.

I am interested in the arc panel setup also. Pics when you get a chance to 412_651_1920
Thank you.

[jktruckin06]

The whole thing should be gone as of tonight guys. Mike Bell is gonna take it.

[NXcoupe]

Yep, it's sitting here. If anyone is interested in anything get with me.

[TooFast98Cobra]

Will you ship parts mike?

[NXcoupe]

Yep, not a problem. I ship all over the country.

[NO SHOT]

What kind of trading will you do for a set of Pro stars on the greg welds?

[NXcoupe]

Need more info on your pro stars.

[TooFast98Cobra]

I have a set of like new single adj. Qa1 struts for a fox body if u would like to trade anything for them plus $ from me . Just upgraded to double santuffs

[NO SHOT]

Need more info on your pro stars.

15-8 -5 1/2bs 15-3 1/2 front newer metric radials nice 275/69 Mickey et street radials

[Yellowstang]

Send pictures of Skinny kid manual brakes with AN bulkheads and fittings - 250 5138334229

[na svt]

how much for the roller...if it's still available?

[NXcoupe]

15-8 -5 1/2bs 15-3 1/2 front newer metric radials nice 275/69 Mickey et street radials

Nice meeting you today Bill.

[NXcoupe]

Send pictures of Skinny kid manual brakes with AN bulkheads and fittings - 250 5138334229

My internet is down at the shop currently. I will try to get that to you today.

[NXcoupe]

how much for the roller...if it's still available?

Still available, and responded to your PM. Haven't gotten to start on it yet.

[NO SHOT]

Nice meeting you today Bill.

Nice to meet you also Mike. My son and I polished on those wheels last night hope to get the slicks on and get some pictures on here later! ! Thanks again Mike! !