Black Horse
02-05-2014, 10:04 AM
I bought this a while ago, used it several times. Its a Chinese knock off of another Chinese unit (Longevity). The Plasma torch works well. I cut some 3/16" plate and it was pushing the limit. The TIG is decent (steel only with DC Inverter) - even at it's full 200 Amp setting it could only weld 1/8" plate. Anything more it struggles to get enough heat into the joint. Same with the stick function - thin plate it seems to work well. The 200 amp is a lie, at best its probably a 80-100 amp unit.
Comes with all the torches, Tig gun, foot pedal, cable and hose (no tank) - currently wired for 220V but can be converted to 110V (change the plug lead). I have some spares for the TIG and Plasma guns as well.
I bought it for around $500 as a new/scratch/dent model (Its listed around $900) $350 and its yours!
http://www.smugmug.com/photos/i-NLgZd5j/0/L/i-NLgZd5j-L.jpg
Comes with all the torches, Tig gun, foot pedal, cable and hose (no tank) - currently wired for 220V but can be converted to 110V (change the plug lead). I have some spares for the TIG and Plasma guns as well.
I bought it for around $500 as a new/scratch/dent model (Its listed around $900) $350 and its yours!
http://www.smugmug.com/photos/i-NLgZd5j/0/L/i-NLgZd5j-L.jpg