Iron trick flow High Port heads

[Rick93coupe]

I bought these a few months ago for a project and didn't end up using them. CRC did a valve job on them and they have new seals, springs, locks and retainers. They also come with Motorsport tall valve covers and roller rockers. I paid 450.00 for them and I'd just like to get my money back out of them.

[draggin50]

You have any pictures Rick? I may have a use for these!!

[Rick93coupe]

Brian, I have your number. I'll text you some in the morning.

[draggin50]

Sounds good!

[Rick93coupe]

http://i121.photobucket.com/albums/o238/Rick88coupe/Mobile%20Uploads/1411004936_zps4f91d025.jpg (http://s121.photobucket.com/user/Rick88coupe/media/Mobile%20Uploads/1411004936_zps4f91d025.jpg.html)

http://i121.photobucket.com/albums/o238/Rick88coupe/Mobile%20Uploads/1411004938_zps1248086e.jpg (http://s121.photobucket.com/user/Rick88coupe/media/Mobile%20Uploads/1411004938_zps1248086e.jpg.html)

http://i121.photobucket.com/albums/o238/Rick88coupe/Mobile%20Uploads/1411004939_zps984984fe.jpg (http://s121.photobucket.com/user/Rick88coupe/media/Mobile%20Uploads/1411004939_zps984984fe.jpg.html)

[Bman]

Wouldn't want to sell just the valve covers would you?

[Rick93coupe]

No sir, I'd like to move them together.

[mustang_gt88]

Do These require special headers? 1.6 or 1.7 roller rockers

[Rick93coupe]

1.6 rockers and according to the brochure when they came out, everything should bolt up. I don't have any experience with standard headers, because the high ports that are on my current motor have headers that face the other direction.

[draggin50]

Everything that I have read on them say that the old school street heats (high ports) and the exhaust port is raised .750". On Corral they talk about them and say a specific header is required.

[Rick93coupe]

not sure Brian, I find threads where people said they'll bolt right up. It probably depends on slight variances in headers.

If you needed a specific header, I guess it's no different than having a P head, except these flow considerably better.

http://i121.photobucket.com/albums/o238/Rick88coupe/highport_zps7ae77c6d.jpg (http://s121.photobucket.com/user/Rick88coupe/media/highport_zps7ae77c6d.jpg.html)

[SLWB16hatch]

A normal header will bolt up. They do not require a special header. The exhaust ports are raised .750 inches, so a long tube will be extremely close to your floor pan. On my car, all I did was use drop mounts. Problem solved

[draggin50]

I wouldn't have any header issues anyways in the 30 Model A pickup!

[SLWB16hatch]

They're a super nice set of heads. I'd buy them back if I didn't have 3 sets of heads as it is. Lol

[Rick93coupe]

I figured I'd put them here first for the SBZ crew but I'll probably list them for more on Craigslist or some of the facebook groups. I don't think they'll last long.

[Rick93coupe]

bump

[Rick93coupe]

CL is a trip. I was actually asked if these were 225cc intake runners.

:doh:

[Rick93coupe]

Sold

[Kwik92GT]

Fuggin A!