Parting out 91 Mustang notch-car, turbo, engine, tranny

[mustangboy]

Ok I've decided to let my mustang and all related parts go. Its time to step up to a Cadillac Cts-v wagon and the stang has to go to make that happen. Already sold the dart 427 so now gonna let the rest of it go. I'll try to list as much info as I can but I'm sure I'll miss some things so feel free to ask if you have any questions. This car made 750hp/872tq on Cincy Speeds dyno with these parts before the 408 was completely rebuilt by Steve Barker. Engine is still sitting on the stand and has not been run since. Here is the list that I was given when I bought the car and to that I have rebuilt the engine changing compression from 8-1 to 10-1. Also put new carpet in as well as some trim pieces, pioneer double din stereo, tinted head and tail lights, had plated paint bumper covers and front fenders, installed new dunlop direzza d2 front tires and am having scott rod panels done in the engine bay at the moment. I am looking for $6k for the roller including the fast xfi 2.0 and all related wiring and sensors including crank trigger, full magnafuel fuel system and ford oem flex fuel sensor to be able to run pump or e85, radiator and fan, alum driveshaft and stiffler driveshaft loop. Would like to get $2250 out of the b&g turbo setup including freshly ceramic coated hotside, gt45 67mm turbo, intercooler, full exhaust, tial/hks wastegate and blow off and all related lines/clamps. Looking for $6k for the complete freshly rebuilt 408 including spider intake/elbow fuel rails, big meziere water pump all the way to the moroso oil pan. Most everything on the engine has been recently powder coated as well. $1450 for the transmission setup which includes tremec tko2 tranny, steeda shifter, freshly powder coated lakewood bell, clutch fork, newer center force dual friction clutch and spec stage 2 clutch that could use new disc. Please feel free to ask question I will answer to the best of my ability. Btw I would rather not part the car any further at this point. If I cant sell I will consider pulling the fast and fuel system off but would like to sell as it is for now. So here is the full list as well as pics. You can pm or call/text at 513-703-5928

91 Notchback, original 5-liter 5-speed car
Black on black, gray interior.
No sunroof
Factory heat and power steering still installed
A/C removed


Engine:
CHP 408W
70s 351W truck block
8.5:1 Compression forged pistons
I-Beam rods
Forged crank
Main girdle
Pro-Race 28oz SFI Balancer
Moroso 7-qt oil pan
Melling SV oil pump
ARP oil pump shaft
Roller conversion with spider and dogbones
Custom-ground Comp Cams hydraulic roller retrofit cam
OEM Ford roller lifters
Canfield Heads, ported by Gary Rohe
2.02 intake, 1.60 exhaust valves
1.7 CHP shaft-mount roller rockers
Chrome fabricated valve covers
CHP Spyder intake manifold with elbow and billet fuel rails
Accufab 95mm throttle body
FMS aluminum radiator
Meziere billet electric water pump with idler
Lincoln Mark-VIII electric fan
Energy suspension poly motor mounts
CVR high-torque starter


Drivetrain:
Tremec TKO II Trans
Steeda Tri-Ax shifter
Ram 11" billet steel flywheel
Spec stage 3 clutch
Ford Clutch cable
Steeda Quadrant
Ram reinforced clutch fork
Lakewood SFI bellhousing
FMS aluminum driveshaft
Stiffler's trans-mounted driveshaft safety loop
Energy suspension poly trans mount
8.8 rear with welded tubes and 9" ends
Eaton posi
FMS 3.55:1 gears
Strange 31-spline axles


Suspension/Chassis/Brakes:
Baer track kit F/R brakes
2-piston front calipers, 1-piston rear
13" front rotors, 11.6" rear
Stainless hoses
Cobra master cylinder
Adjustable proportioning valve
PA tubular K-Member
PA tubular front control arms with SN95 ball joints
SN95 spindles
KYB shocks and struts
Front coil-over conversion with 14" 225lb springs
Mac rear springs
Billet caster/camber plates
Maximum Motorsports XD rear lower control arms
Edelbrock adjustable upper arms
Fully welded and reinforced torque boxes
Welded subframe connectors


Fuel System:
Magnafuel ProTuner MP-4301 Fuel pump (1500hp)
Magnafuel 100 micron pre-filter
Magnafuel 40 micron post-filter
Granatelli pickup
Aeroquip -10, -8, and -6 Push-lock hose
(-10 from tank to y-block at engine, -8 to rails, -6 to regulator, -6 return)
Aeroquip and Magnafuel fittings and y-blocks
Aeromotive regulator
160lb/hr Ford fuel injectors
Runs on E85


EFI/Ignition:
FAST XFI 2.0 with IAT, CTS, 3-BAR MAP, TPS sensors
Ford OEM Flex-Fuel sensor
GM boost-control solenoid
Wideband sensor
FAST wire harness
FAST crank trigger
MSD distributor with Comp Cams polymer gear
MSD Digital-6 ignition box
MSD Blaster II HVC Coil
MSD plug wires


Electrical/Wiring/Accessories:
Trunk-mounted Optima red-top battery
2/0 battery cable
Moroso 200A disconnect
Misc fuse and distribution blocks
200A Powermaster alternator
Clifford alarm with 4 sirens, remote start, and power window module
MC-Machine billet gauge plate
Autometer Phantom II gauges. (Speedo, Tach, Fuel level, Water temp, Oil pressure, Volts)
AEM Wideband gauge in Autometer a-pillar pod
Eclipse 55040 head unit with 8V preouts
Rockford Fosgate audio cables
Rockford Fosgate amplifiers
Boston Acoustics 12" subwoofer
Custom fiberflass sub enclosure in spare tire well
Cerwin Vega front component speakers, rear 2-way speakers
Underhood wiring relocated to inner fenders


Body/Interior/Exterior:
Corbeau TRS seats with Corbeau sliders
OEM 03-04 Cobra wheels
275/40/17 MT ET Street Radials
Boss Inc 2000 Cobra R hood
APC Projector headlights/markers/corners
Custom LED tail lights
Metal door handles
Lots and lots of Dynamat
Windows tinted 35%front, 20% rear


Turbo kit/Exhaust:
Modified B&G hot side
3.5" downpipe to Y-pipe to dual 3" exhaust
All exhaust is V-Banded
Magnaflow stainless mufflers with dumps
GT45Y2004K turbo (large frame t4)
3" aluminum intercooler piping
3" inlet and outlet air/air intercooler
HKS SSQV blow off valve
Tial V44 wastegate

https://farm9.staticflickr.com/8610/16651369116_25b6426c1c_b.jpg (https://flic.kr/p/rnqBUY)20140713_111344 (https://flic.kr/p/rnqBUY) by mustangboy429 (https://www.flickr.com/people/11756743@N02/), on Flickr

https://farm8.staticflickr.com/7716/16933778708_c8332f4c37_b.jpg (https://flic.kr/p/rNo3rS)007 (https://flic.kr/p/rNo3rS) by mustangboy429 (https://www.flickr.com/people/11756743@N02/), on Flickr

https://farm8.staticflickr.com/7589/16737252307_7a96746e23_b.jpg (https://flic.kr/p/rv1MZD)20140623_112719 (https://flic.kr/p/rv1MZD) by mustangboy429 (https://www.flickr.com/people/11756743@N02/), on Flickr

https://farm8.staticflickr.com/7616/16914472857_d5795a7fc3_b.jpg (https://flic.kr/p/rLF6un)20140601_192044 (https://flic.kr/p/rLF6un) by mustangboy429 (https://www.flickr.com/people/11756743@N02/), on Flickr

https://farm9.staticflickr.com/8748/16499406084_c5a8d87a70_b.jpg (https://flic.kr/p/r8ZLAG)20140820_185741 (https://flic.kr/p/r8ZLAG) by mustangboy429 (https://www.flickr.com/people/11756743@N02/), on Flickr

https://farm9.staticflickr.com/8721/16499406394_63b8b8478f_b.jpg (https://flic.kr/p/r8ZLG3)20140827_110446 (https://flic.kr/p/r8ZLG3) by mustangboy429 (https://www.flickr.com/people/11756743@N02/), on Flickr

https://farm9.staticflickr.com/8723/16935655359_5938150e45_b.jpg (https://flic.kr/p/rNxEiV)20141006_204517 (https://flic.kr/p/rNxEiV) by mustangboy429 (https://www.flickr.com/people/11756743@N02/), on Flickr

https://farm8.staticflickr.com/7616/16943289222_3a338573b2_b.jpg (https://flic.kr/p/rPdMAf)20140617_104701 (https://flic.kr/p/rPdMAf) by mustangboy429 (https://www.flickr.com/people/11756743@N02/), on Flickr

https://farm9.staticflickr.com/8696/16322205594_5d241d0a1f_b.jpg (https://flic.kr/p/qSkz4Q)20140723_113403 (https://flic.kr/p/qSkz4Q) by mustangboy429 (https://www.flickr.com/people/11756743@N02/), on Flickr

<object type="application/x-shockwave-flash" width="400" height="225" data="https://www.flickr.com/apps/video/stewart.swf" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"><param name="flashvars" value="intl_lang=en-US&photo_secret=eb69278ab8&photo_id=16737375887&hd_default=false"></param><param name="movie" value="https://www.flickr.com/apps/video/stewart.swf"></param><param name="bgcolor" value="#000000"></param><param name="allowFullScreen" value="true"></param><embed type="application/x-shockwave-flash" src="https://www.flickr.com/apps/video/stewart.swf" bgcolor="#000000" allowfullscreen="true" flashvars="intl_lang=en-US&photo_secret=eb69278ab8&photo_id=16737375887&hd_default=false" width="400" height="225"></embed></object>

[mustangboy]

Couple other things the 160lb injectors can be bought for a little extra with either the turbo setup or the engine just whoever comes first gets first dibs. I also recently purchased a steering rack for 04 cobra that I will include with the car for the $6k price or will sell separately. And lastly I have an extra set of 03 Cobra wheel powder coated gold I will sell seprately as well for $500obo. Here is a pic of 2 of them so you can see the color

https://farm9.staticflickr.com/8584/16054970884_2e70939ef7_b.jpg (https://flic.kr/p/qsHVuQ)20140604_162336-1 (https://flic.kr/p/qsHVuQ) by mustangboy429 (https://www.flickr.com/people/11756743@N02/), on Flickr

[mustangboy]

Here is dyno video

https://flic.kr/p/rv2qJk

[exrider416]

Definitely one of my favorite foxes. Might be time to unload some cars!

[Rick93coupe]

CadillacBoy?

[mustangboy]

Hmmm cadillacboy, has a ring to it, lol

[mustangboy]

Someone wants to buy it all I'll make a package deal

[CNTLOSE]

Kenny that is a beautiful Stang. I wish I had the coin to snatch it up from you. Best of luck with the sale!

[mustangboy]

Thanks, someone is going to end up with a beast. The torque this thing makes is insane

[Maximus]

Should note that you accept Food Stamps. :D

[mustangboy]

Roller is sold!!! Still have the 408, turbo setup, tranny setup and extra set of gold oem 03 cobra wheels and a low mile 04 cobra steering rack for sale

[SN95N/A]

Interested in your transmission

[mustangboy]

If you have any questions feel free to ask

[USMCPONY]

Roller is sold!!! Still have the 408, turbo setup, tranny setup and extra set of gold oem 03 cobra wheels and a low mile 04 cobra steering rack for sale

I screen shot this ad and sent it to my cousin. My cousin was the one who bought it.

[mustangboy]

Thanks

[IWRBB]

I want the Cobra steering rack. Will $150 do?

[1baddlx]

How much for the intake setup?

[mustangboy]

Would rather sell the the engine complete if I can. I have $250 in the rack so that is what takes it

[mustangboy]

Btw the rack only has 40k miles

[1baddlx]

Ok thanks

[SN95N/A]

Would like to talk to you about trans I tried to message you but box is full

[mustangboy]

I am out on the lake in the boat right now as soon as I get back I will message you about it thanks

[SN95N/A]

No problem man enjoy yourself

[Stangman]

Looks like the car is already for sale again on facebook...

[mustangboy]

Yeah I saw that

[Maximus]

Looks like the car is already for sale again on facebook...

That was quick. Link?