Yellow98Cobra
11-25-2015, 06:46 PM
I am up in the air do I build this car up or let it go and buy a coyote car: So here is a feeler post.
http://i835.photobucket.com/albums/zz271/eea525/Mobile%20Uploads/2015-11/17C9EAB8-540E-4949-A960-24AE3B618AAF_zpscemtmanc.jpg (http://s835.photobucket.com/user/eea525/media/Mobile%20Uploads/2015-11/17C9EAB8-540E-4949-A960-24AE3B618AAF_zpscemtmanc.jpg.html)
http://i835.photobucket.com/albums/zz271/eea525/20140814_185420_zps5e768f3f.jpg (http://s835.photobucket.com/user/eea525/media/20140814_185420_zps5e768f3f.jpg.html)
http://i835.photobucket.com/albums/zz271/eea525/20140814_164152_zps93cda844.jpg (http://s835.photobucket.com/user/eea525/media/20140814_164152_zps93cda844.jpg.html)
http://i835.photobucket.com/albums/zz271/eea525/download_zps3955a235.jpg (http://s835.photobucket.com/user/eea525/media/download_zps3955a235.jpg.html)
1998 Mustang Cobra
62000 miles
4.30 gears
Mac long tubes, Mac X pipe, Mac Mufflers
Comp 106100 cams
Steeda Tri AX
Eibach Pro Kit
17" Forgelines, 275's front, 315 Nitto Drag radials rear
Steeda Subframe connectors
JBA lower control arms
Centerforce Dual Friction clutch
17" Factory Cobra Wheels
Kaenen s281 spoiler
-Stock rear spoiler
$10500 for car (it needs tuned)
Also have a vortech supercharger kit with the following that could go with the car for $3000.00 or if the car sells it will be available.
- Vortech V1 S-trim Approx 10k MIles
- Procharger 3 core intercooler
- Vortech 3.40 Pulley installed, will include 3.60 as well.
- SN95 Cobra Vortech Discharge Pipe, tapped for IAC and Screw in IAT sensor
- CX racing intercooler piping kit with additional couplers and pipes added
- Vortech maxflow blow off valve with K&N filter Attached
- 3" Blow off Valve Pipe/Flange
- Coolant Crossover Tube
- 8 Ford Racing 39lbs EV6 injectors
- 8 EV6 Adapters
- Anderson Power pipe with matching blue coupler installed
- K&N Filter
- SCT BA5000 Blow Though MAF
- 3" aluminum MAF housing
- Screw in Motorcraft IAT sensor installed in discharge pipe.
- Autometer Boost and Wideband phantom gauges
- Pillar Pod.
-Walbro 255 inline fuel pump
- Lightning 90mm Mass Air
http://i835.photobucket.com/albums/zz271/eea525/Mobile%20Uploads/2015-10/0AC7ED40-4B43-4544-BF7F-A7BA7C545A8B_zpsamhi6foc.jpg (http://s835.photobucket.com/user/eea525/media/Mobile%20Uploads/2015-10/0AC7ED40-4B43-4544-BF7F-A7BA7C545A8B_zpsamhi6foc.jpg.html)
http://i835.photobucket.com/albums/zz271/eea525/Mobile%20Uploads/2015-11/17C9EAB8-540E-4949-A960-24AE3B618AAF_zpscemtmanc.jpg (http://s835.photobucket.com/user/eea525/media/Mobile%20Uploads/2015-11/17C9EAB8-540E-4949-A960-24AE3B618AAF_zpscemtmanc.jpg.html)
http://i835.photobucket.com/albums/zz271/eea525/20140814_185420_zps5e768f3f.jpg (http://s835.photobucket.com/user/eea525/media/20140814_185420_zps5e768f3f.jpg.html)
http://i835.photobucket.com/albums/zz271/eea525/20140814_164152_zps93cda844.jpg (http://s835.photobucket.com/user/eea525/media/20140814_164152_zps93cda844.jpg.html)
http://i835.photobucket.com/albums/zz271/eea525/download_zps3955a235.jpg (http://s835.photobucket.com/user/eea525/media/download_zps3955a235.jpg.html)
1998 Mustang Cobra
62000 miles
4.30 gears
Mac long tubes, Mac X pipe, Mac Mufflers
Comp 106100 cams
Steeda Tri AX
Eibach Pro Kit
17" Forgelines, 275's front, 315 Nitto Drag radials rear
Steeda Subframe connectors
JBA lower control arms
Centerforce Dual Friction clutch
17" Factory Cobra Wheels
Kaenen s281 spoiler
-Stock rear spoiler
$10500 for car (it needs tuned)
Also have a vortech supercharger kit with the following that could go with the car for $3000.00 or if the car sells it will be available.
- Vortech V1 S-trim Approx 10k MIles
- Procharger 3 core intercooler
- Vortech 3.40 Pulley installed, will include 3.60 as well.
- SN95 Cobra Vortech Discharge Pipe, tapped for IAC and Screw in IAT sensor
- CX racing intercooler piping kit with additional couplers and pipes added
- Vortech maxflow blow off valve with K&N filter Attached
- 3" Blow off Valve Pipe/Flange
- Coolant Crossover Tube
- 8 Ford Racing 39lbs EV6 injectors
- 8 EV6 Adapters
- Anderson Power pipe with matching blue coupler installed
- K&N Filter
- SCT BA5000 Blow Though MAF
- 3" aluminum MAF housing
- Screw in Motorcraft IAT sensor installed in discharge pipe.
- Autometer Boost and Wideband phantom gauges
- Pillar Pod.
-Walbro 255 inline fuel pump
- Lightning 90mm Mass Air
http://i835.photobucket.com/albums/zz271/eea525/Mobile%20Uploads/2015-10/0AC7ED40-4B43-4544-BF7F-A7BA7C545A8B_zpsamhi6foc.jpg (http://s835.photobucket.com/user/eea525/media/Mobile%20Uploads/2015-10/0AC7ED40-4B43-4544-BF7F-A7BA7C545A8B_zpsamhi6foc.jpg.html)