Parse error: syntax error, unexpected '<' in /opt/bitnami/apache2/htdocs/forums/archive/global.php(117) : eval()'d code on line 1
Trick flow heads [Archive] - StangBangerz Forums
PDA

View Full Version : Trick flow heads


Eighty85Oh
03-17-2016, 10:29 AM
Can trick flow twisted wedge heads be run on a stock bottom end without any ptv clearance issues? Mild cam less than .500 lift. Are there any other problems running these heads? Spark plugs/wires headers?


Sent from my iPhone using Tapatalk
2Fast4You
03-17-2016, 01:08 PM
If your wanting to run a TW head, you will want to run TW pistons.
draggin50
03-17-2016, 04:16 PM
Under .500 lift I don't think it's an issue though.
98stangv6
03-17-2016, 04:40 PM
I have TW 170s on a stock bottom end with TFS1 cam with no problems.
Eighty85Oh
03-17-2016, 05:13 PM
I have TW 170s on a stock bottom end with TFS1 cam with no problems.

That's what I've been reading. As long as you stay under 540 lift 235 duration and 10 degree separation. The 170 will work on stock Pistons. Just wanted to hear from someone that has done it rather than he said she said. Thanks.


Sent from my iPhone using Tapatalk
Rick93coupe
03-17-2016, 10:13 PM
That's if you put it in straight up (dot to dot)f. If you start playing with cam timing, you can run into trouble. Just clay it to be sure.
NXcoupe
03-18-2016, 11:15 AM
Yes, I've installed and usedthese heads a lot over the years. They are my preferred choice for cylinder heads. Yes .540 lift 235 duration is max. Stg 1 tfs cam works perfect with them. The new 11R heads have more ptv clearance in them as well.