Blowpastyou
10-06-2016, 11:55 AM
121k, has salvage title! All damage was in front of strut towers.
Clean car with absolutely no rot anywhere. I bought the car for something to tinker with and I now want a new 2016-17, so this one has to go. Runs great, a lot of new parts. Here's a quick rundown.
-Rebuilt 302
-F CAM
-Arp head studs
-Trickflow heads
-1.6 rr's
-fms short valve covers
-Ported and welded truck lower
-Systemax upper
-75mm throttle body(fox body swap done, no more hanging idle)
-msd distributor and coil
-bbk chrome long tubes and x pipe with Mac dumps(new)
-upr shark billet caster camber plates(new)
-strange 10 way foxbody struts(new)
-strange coilover sleeves (new)
-strange 10 way rear shocks (new)
-upr extreme spherical bushings (new)
-double adjustable upper control arms
-3.73 gear
-Moser diff support cover
-firewall adjuster, quadrant
-mgw shifter
-staggered 17's, pitted
-has an sct flip chip with unknown tune
I did the entire top end myself. It is done right, pushrods measured correctly, valves adjusted correctly. Used felpro pt1 headgaskets, felpro 1250 intake gaskets.
Any other questions message. Thanks
NO TRADES!
937...681..0911. Eddie
Clean car with absolutely no rot anywhere. I bought the car for something to tinker with and I now want a new 2016-17, so this one has to go. Runs great, a lot of new parts. Here's a quick rundown.
-Rebuilt 302
-F CAM
-Arp head studs
-Trickflow heads
-1.6 rr's
-fms short valve covers
-Ported and welded truck lower
-Systemax upper
-75mm throttle body(fox body swap done, no more hanging idle)
-msd distributor and coil
-bbk chrome long tubes and x pipe with Mac dumps(new)
-upr shark billet caster camber plates(new)
-strange 10 way foxbody struts(new)
-strange coilover sleeves (new)
-strange 10 way rear shocks (new)
-upr extreme spherical bushings (new)
-double adjustable upper control arms
-3.73 gear
-Moser diff support cover
-firewall adjuster, quadrant
-mgw shifter
-staggered 17's, pitted
-has an sct flip chip with unknown tune
I did the entire top end myself. It is done right, pushrods measured correctly, valves adjusted correctly. Used felpro pt1 headgaskets, felpro 1250 intake gaskets.
Any other questions message. Thanks
NO TRADES!
937...681..0911. Eddie