Parts clean up!!!

[draggin50]

Cleaning up around the garage. Selling all kinds of stuff.
Built and narrowed 8.8. 33 spline axles, spool, narrowed 2.5 inches per side, new strange brakes, 5/8's studs, 5x4.75 bolt pattern $1900

15x10 Holeshots with 4 inch bs. 5x4.75 bolt pattern with 235/60 PBR's.$1200

394 Windsor. Block is junk. Wiseco pistons, eagle rods, arp main and head studs, prothane mounts. $600

Team Z mini tubs $350

Racecraft 17 inch aluminum wing for a coupe $450

Anderson power pipe, new. $250

Explorer gt40p intake $150

96-04 front spindles and brakes $75

289 heads and comp 3/8s stud mount rockers $200

9 inch rear end with 4.56 and spool $450

Donathan racing from bumper support $175

Flowtech fwd and down turbo headers $250

Victor Jr intake $225

Holley 650 carb $400

Trick flow valve covers $75

Motorsports valve covers (breather holes are cut open) $50

SLP catback $200

Complete 5.0 engine from the 92. Has ARP head bolts and 1.7 rockers. Throttle body to pan. $1000

292 Y block, 3 deuces, Hunt Mag, and powermaster alternator $1200

Passenger side rear vert quarter $75


There's more, I just can't think of it all. I can text pictures.

[draggin50]

Also have a Dart block 427 that is all new and needs machined and assembled. Iron Eagle 9.5 block with Cleveland mains, ZSR 427 rotating assembly with custom Diamond pistons, Molner power adder plus rods, tool steel wrist pins, and Molnar crank, trick flow 225 highports, Holley Hi-ram intake, Innovators west balancer, custom hydraulic roller cam, Moroso pan, Comp ultra magnum rockers, stud girdles. ARP bolts and head studs, misc gaskets, and a bunch of other stuff. $11,500. Im sure Im forgetting a lot. Everything is new and in boxes still.

[S281SC]

What is the 9” ford set up for?


Sent from my iPhone using Tapatalk

[draggin50]

What is the 9” ford set up for?


Sent from my iPhone using Tapatalk

Its from a mid 70's Versailes. I cant remember the length right off. This was from a coupe I bought that had leaf springs and shackles welded in... I was going to cut off all the brackets and use it in the Model A but I sold it too!

[draggin50]

292 Y block and Holley carb are gone. Still have the rest of it.

[draggin50]

The 427 rotating assembly, Hi-Ram intake, and the rocker stud girdles are also gone. Will sell the rest all separate.

225 ZSR Highports $3500

Custom hydraulic roller cam $400

Comp Ultra Magnum rockers for Highports $475

Moroso pan and pick up for 351W $400

Innovators West 0 balance balancer $400

Aluminum driveshaft with 31 spline yoke $300

Driveshaft loop $50

Team Z rear drag springs $175