Parse error: syntax error, unexpected '<' in /opt/bitnami/apache2/htdocs/forums/archive/global.php(117) : eval()'d code on line 1
Grey Mare finally alive [Archive] - StangBangerz Forums

PDA

View Full Version : Grey Mare finally alive



gzbs197
10-10-2023, 12:17 PM
I got the car running and working again. After fighting a self induced harness issue - she is alive.

Been doing some road pulls and getting her dialed in. 2nd gear WOT pull from 2500 to 7300 on a 4psi gate - she made almost 8psi.

I know I am the bastard child because I have an LS but it does sound good with the choppity chop.

L96 6.0 LS bored to a 370 / Forged rods /pistons / crank / BTR Springs / trunion upgrade / BTR Stage 3 turbo cam / titanium push rods / LS7 lifters / LS9 head gaskets / Summit Intake / 102mm DBW TB / Bosch 210 injectors
Forced Performance 88/92 1.24 AR T6 Turbo - 3.5 " cold side / 2.5" hot side / dual 44mm WG / 50mm BOV / On3 6" Intercooler
FTI TH400 reverse valvebody / sportsman brake / 501 Perfect Converter 9.5 Billet converter / Dayton Clutch & Joint driveshaft
Strange 35 spline spool / axles / C-Clip Eliminators

Oct 21st will probably be the 1st official race - a no-prep at Pacemakers


https://youtube.com/shorts/MsxSLz7cRAU?feature=share

NXcoupe
10-10-2023, 02:39 PM
Can't wait to see it running.

gzbs197
10-13-2023, 08:15 AM
Went on Mike's dyno the other night. Car made 1089HP / 952tq. Had a few issues to work out but we made three pulls of 1000HP or more so pretty happy with it so far.

Maximus
10-13-2023, 09:00 AM
Went on Mike's dyno the other night. Car made 1089HP / 952tq. Had a few issues to work out but we made three pulls of 1000HP or more so pretty happy with it so far.

Sweet! E85 or??

gzbs197
10-13-2023, 12:22 PM
Pump E85.

Maximus
10-13-2023, 02:06 PM
Crank up the Boost!!! :D

gzbs197
10-19-2023, 09:54 AM
Upgraded fuel pumps the other day. Turns out I only had 2 TI-267's. I upgraded to 2 TI-285's for now. Going to get the Aeromotive 5GPM pump over the winter.
Fixed an issue with the boost control - it was wired backwards where boost + was pinned to boost -.
Cleaned up some of the wastegate hose routing.

Now it makes the right boost. Commanded 10psi last night and it made 10psi (12psi at times lol) Just have to get the PID values dialed in now but it is ready to hit the track.