Lots of pics of powder coating I've done lately

Thats purdy! :drool:

Here you go cracker the pics you demanded to see:D V/c's are tuscan matte black w/ chevy orange lettering and the blower bracket is silver vein and then the inner fenders are satin black. Oh yeah did another rear end girdle in carbide black.

http://farm2.static.flickr.com/1403/...047f32e8_z.jpg

http://farm2.static.flickr.com/1383/...f20b3d09_z.jpg

http://farm2.static.flickr.com/1284/...c36c4eaa_z.jpg

http://farm5.static.flickr.com/4125/...9064a3b5_z.jpg

http://farm5.static.flickr.com/4112/...0063dfaa_z.jpg

Very cool!!:bigthumb

Quote:

---

Originally Posted by mustangboy

I havn't posted many pics lately cause everything has been carbide or gloss black. So finally I got something with color to do. The frame is lime green and the swing arm is dormant blue.

Before

http://farm2.static.flickr.com/1183/...aa2663de_z.jpg

After

http://farm2.static.flickr.com/1140/...200bb3ca_z.jpg

http://farm5.static.flickr.com/4131/...9e7495d3_z.jpg

http://farm5.static.flickr.com/4024/...9b589731_z.jpg

---

Will this blue be as reflective on Steel as it is on the alum swinger?

Quote:

---

Will this blue be as reflective on Steel as it is on the alum swinger?

---

Yes it will. It is an opaque color so you do not see any of the substrate under the color.

Well since the board got screwed up I thought I would go back and update some of my pics.

Chrome/satin black/dormant blue

http://farm5.static.flickr.com/4144/...3d7a92b2_z.jpg

carbide black/custom pinstriped on the red

http://farm6.static.flickr.com/5205/...02983095_b.jpg

Some Billet Specialties w/ the inserts done in gloss black

http://farm6.static.flickr.com/5042/...aec665b2_b.jpg

Here is someones Christmas present I just did. Colors are mirror black and lime green

http://farm6.static.flickr.com/5203/...a2ea8163_z.jpg

Those rails look good. Do you have anything done in that color(pics)

They are dormant blue

pm sent

back at you

Here are some tractor wheels before, after blasting and then finished. Color is mirror red

http://farm6.static.flickr.com/5289/...f961e765_z.jpg

http://farm6.static.flickr.com/5168/...00b6bd87_z.jpg

Quote:

---

Originally Posted by mustangboy

Here are some tractor wheels before, after blasting and then finished. Color is mirror red

http://farm6.static.flickr.com/5289/...f961e765_z.jpg

http://farm6.static.flickr.com/5168/...00b6bd87_z.jpg

---

Those look good Kenny.

Thanks man, they were pretty damn rusty. They still have pitting marks in them but they look WAY better.

Here is a Dedenbear powerglide case from yesterday, it is in mirror black

http://farm6.static.flickr.com/5165/...2e345bd1_z.jpg

http://farm6.static.flickr.com/5283/...c7b69e4e_z.jpg

Question for you, Can you powder coat say hood pins and the little discs that go under them? Will the coating come off from use? Like how durable would it be since it will rub every time you put the pin in and pull it out?

Thanks, I'm thinking of having you do some sets so i can alternate pins and discs in different colors.

John

This color is harder than hell to get a good pic of the true color. Here is a couple in different lights. BTW it is dormant red.

http://farm6.static.flickr.com/5202/...4e4cdc53_z.jpg

http://farm6.static.flickr.com/5089/...706a327b_z.jpg

http://farm6.static.flickr.com/5289/...801674e5_z.jpg

Couple parts in chrome and black carbide

http://farm6.static.flickr.com/5288/...36bc20ba_b.jpg

Here is a new color I havn't really done yet it is called Argento and it is was used on a Procharger bracket set. Also some tuscan matte black and chevy orange on a couple parts. Finally some satin black ceramic on a turbo setup.

http://farm6.static.flickr.com/5283/...8da07f2b_z.jpg

http://farm6.static.flickr.com/5084/...ebcd52fc_z.jpg

http://farm6.static.flickr.com/5287/...44846151_z.jpg

Argento looks KILLER!!
You can see pics of the brackets, installed on my FB page. They are under "Mikes 2010"

Thanks for the continued support Craig, appreciated as always.