I picked up a 91 GT roller and Ill be needing some parts...
Drive shaft
Draglites
Tubular K member and A arms
A9L computer
gray interior parts
catback exhaust
front seats
good stock 5.0 engine
cam
Printable View
I picked up a 91 GT roller and Ill be needing some parts...
Drive shaft
Draglites
Tubular K member and A arms
A9L computer
gray interior parts
catback exhaust
front seats
good stock 5.0 engine
cam
I have a few gray interior parts. Pm at 513 257 1584
Brian I'll have grey interior minus seats for sale
What u buildings now buddy. A nice little cruiser.
Just an old 91 GT. Nothing nice that's for sure! Im just gonna try to go fast in a beater!
Brian I have a good A9L I took out of the coupe. The seal has never been broken on it also have a MAC pro chamber and possibly sell the mac catback off the car.
I found a computer. Might be interested in the exhaust though.
Also I need a set of 94-95 spindles and a nice drivers side LX tail light.
Brian I have a good A9L I took out of the coupe. The seal has never been broken on it also have a MAC pro chamber and possibly sell the mac catback off the car.
Also need a nice drivers side LX tail light...
I hope you can find parts better than I can Brian
Im looking for cheap parts!!! Those are pretty easy to find!
Ill look tomorrow but i might have a stock driveshaft you can have
Cool! Thanks!
Ill still need to get with a few guys on some parts. Busy with work again...
Still need parts....
Good 5.0 complete, driveshaft, drivers side LX tail light, cat back, K member and A arms, cam, and FI intake. Project scrap pile is in need!!! The cheaper the better!
Sure am... What cams you have? How much for one of the explorer intakes? Sucks I just sold one to Jesse... The story of my life!
Would $80 work for an Explorer upper and lower ? I've got a Lunati 51014 cam if you want it ? I'd need $100 for it....
Just let me know and sorry about the delay in responding !! You can text me at Five One Three 3154698.
I've got a 347 short block and aluminum cyl heads as well if you need ....I'd go through the short block though. Only has approx 500 miles on it but kept getting silver sparkly flecks in the oil.
-Scott
Looking for more parts...
Hose from the valve cover to the throttle body
Intake hose from the mass air meter to the throttle body
Drivers side LX tail light
Brian I have the hose that runs from the throttle body to the valve cover fill tube and I have a stock inlet tube from throttle body to mass air if it will work. I have a stock meter and airbox and all I have the A9L out of the car as well if you know anyone needing one.
That would work for me. I have a C&L mass air meter already and the A9L.
I will bring them along tomorrow.
Cool!!! Works for me!