1969 Mustang with LMR Series 3 Rims in Bronze

I ended up not getting the Kenne Bell, so I went this route.


Decided I wanted to change up my rims from the 2004 Mach 1 wheels to something a little different. As far as I know, I am the first to put this combo on a classic Mustang.



This is the kit that I purchased:
https://lmr.com/item/WTK-464816Z/mus...e-htr-z2-94-04

For my suspension setup:
I am running 1" spacers on the front and rear.
The fronts have have 1" lowering springs with an extra 1/4 coil cut out:
https://www.cjponyparts.com/contour-...973/p/CSC6773/
The rears currently have the stock leaf springs and a 1" lowering kit:
https://www.cjponyparts.com/rear-end...970/p/CLK1042/


And that is it. No fender rolling. And everything is fine in the front with nothing rubbing from steering wheel lock to lock.

I think it turned out awesome! I just wheeled it out of the garage, so really didnt take the time to clean up the tires yet.


Old Mach 1 rims:
https://i.imgur.com/2OhaEqQ.jpg



And finally:



https://i.imgur.com/mVKWQ2e.jpg

https://i.imgur.com/Ew5tIhQ.jpg

https://i.imgur.com/Eb7pCvB.jpg

https://i.imgur.com/CSHV2Dc.jpg

https://i.imgur.com/KGvtc6g.jpg

https://i.imgur.com/53oHq4x.jpg

https://i.imgur.com/JLjnxB5.jpg

https://i.imgur.com/SlTPpl1.jpg

https://i.imgur.com/0GbIkUE.jpg

https://i.imgur.com/q9fHQKg.jpg

https://i.imgur.com/rN9n4to.jpg

https://i.imgur.com/2KzYGP6.jpg

Man that's a huge difference! Looks real good!

I always loved the front of the 69. One day, I will have a 69 Mach 1...

Looking good! You can go plenty fast with just a carburetor.

Looks killer with the new rims! Digging the headlights too! :cool1:

Looks Killer Paul !!!

Looks great. Very nice car

I dig it

Paul, it looks killer. Love the stance and the wheels look great.

Wow! Amazing what a set of rims can do for a car. Looks great!

It looks great man!!

Looks Good...

Your car is pretty badass.

Its getting there, I ordered some 4.5 1" drop leaf springs for it. Also got a Willwood front disc conversion. I am debating getting a 9" for it, I dont think my power level warrents it, but I hear upgrading the 8" is just a waste of money. Like a 10 bolt in a 4th gen. After that, a coilover conversion in the front (really wish I would have done that from the start, just didnt know.)

Quote:

---

Originally Posted by Ackbar00

Its getting there, I ordered some 4.5 1" drop leaf springs for it. Also got a Willwood front disc conversion. I am debating getting a 9" for it, I dont think my power level warrents it, but I hear upgrading the 8" is just a waste of money. Like a 10 bolt in a 4th gen. After that, a coilover conversion in the front (really wish I would have done that from the start, just didnt know.)

---

Nice ride. What coilover kit are you looking at I’m considering some for my 69 too.

The QA1 is the cheapest:
https://www.cjponyparts.com/qa1-pro-.../p/MS40210450/

Prolly go with that one. Everything else goes up to $1000 or more.


EDIT: These seem promising as well

https://www.ebay.com/itm/Viking-Warr...EAAOSwEg9enfzC

The Viking stuff is pretty nice and probably well worth the money.

Quote:

---

Originally Posted by draggin50

The Viking stuff is pretty nice and probably well worth the money.

---

The more I look at it, the more I like it. Has double adjustable shocks and uses the stock shock "hangers" as opposed the QA1 for the same price.

looks great, wish i had time to mess / drive a classic

I know this sounds insignificant but have you thought about color matching the red decimal on the 5.0 emblems to match the wheels? Just curious. Looks nice.

I like it. A lot of older cars look weird when the owners go for the modern low profile tires, big wheels, huge offsets etc, becasue they take it too far- but that looks good. Wheel color works well with the paint too.

Quote:

---

Originally Posted by redfirepearlgt

I know this sounds insignificant but have you thought about color matching the red decimal on the 5.0 emblems to match the wheels? Just curious. Looks nice.

---

That'd look good.

Done a bit of work to it. Ended up ordering a QP 9" for it. Got the rear sitting just about perfect now. Has a little bit of rubbing with the fender lip, so I am going to be cutting them out today.
https://i.imgur.com/rPPUfMk.jpg

https://i.imgur.com/Dzst5nd.jpg

https://i.imgur.com/GbL6K2X.jpg

Front needs to come down a bit to match. I sold my old rims, so I did order that Viking Coilover setup, supposed to be here in a few weeks.

Looking good Paul. That's a nice looking rear end housing too.

That should hold a little more power!!

Looks really good, that 9" is sweet.