Need Advice on How To Wire in a New Head Unit....

[Katmandu]

Car in question is a 1991 GT with Premium Sound system.

The head unit crapped out and I need to swap it out. I have another aftermarket head unit that I wish to install, but I'm clueless on how to wire it in.

Here's a few pics I took of my setup and the head unit that I want to install.

http://www.katmanduonline.net/pics/S...all/index.html



BTW, I tried some of the pre-fabbed wiring harnesses from a local parts store (looked up in the Chart) and the wiring was NOT right. I figure since this is the Premium system (for 91) with the EQ/AMP, the wiring HAS to be different some how.

How do I go about figuring this wiring stuff out ????

I'd appreciate any advice!

[Sharad]

It's super easy to run wires into the doors of a fox body. I'd tap the factory harness for power and run new speaker wires. (that's what I do in all of my Mustangs) It's simple, easy, and better for the system. (upgrading the puny factory wiring)

If you have more specific questions, let me know!

[Katmandu]

It's super easy to run wires into the doors of a fox body. I'd tap the factory harness for power and run new speaker wires. (that's what I do in all of my Mustangs) It's simple, easy, and better for the system. (upgrading the puny factory wiring)

If you have more specific questions, let me know!

Thanks man.

How do I wire in the factory eq/amp with the new head unit ?

[Black Hole]

Thanks man.

How do I wire in the factory eq/amp with the new head unit ?

I wouldn't.....

Newer headunits are LIGHT YEARS ahead of that EQ.....most have built in EQ's and those that don't are still better. JMO.

[Sharad]

yep. What he said. Bypass as much of the factory stuff as possible!

[Katmandu]

I wouldn't.....

Newer headunits are LIGHT YEARS ahead of that EQ.....most have built in EQ's and those that don't are still better. JMO.

I think I'll go ahead and just do that. Only problem is the EQ/AMP bracket is RIVETED to the radio. I don't want a big hole beneath my new radio, and I think I'll keep the EQ/AMP there to plug up the hole.

Guess I'll just drill out the rivets.

Any other ideas on how to do this better ???

[Sharad]

just buy a mounting kit! Probably ten to fifteen bucks at your local circuit city or best buy?

[Katmandu]

just buy a mounting kit! Probably ten to fifteen bucks at your local circuit city or best buy?

I have one in my garage..... SOMEWHERE !!!

Guess I'll need to buy another one!