Page 1 of 2 12 LastLast
Results 1 to 20 of 22

Thread: Help with fixing up the new garage!

  1. #1
    Join Date
    Mar 2004
    Location
    Goshen
    Posts
    5,929

    Help with fixing up the new garage!

    Finally moved out, and have my own garage to work out of. Now its time to fix it up, as it is pretty basic at its best. Its basically just wood framing and a concrete floor.

    So what should be the first things I do? I'd like to do some drywall and insulation first. Then I'd like to add lighting and check all the wiring to make sure the wiring is ok for me to run more lights, and enough juice to run a small scale air compressor.

    But I have no idea where to start, on selecting anything. I'll probably just go up to home depot for the insulation and dry wall, but as for wiring and lighting I have no idea where to begin.

    Any help or tips about anything dealing w/ garages would be greatly appreciated.
    98 Cobra - Bolt Ons
    2017 F-150 3.5 EB

  2. #2
    Join Date
    Apr 2004
    Location
    Eastgate
    Posts
    6,161
    insulation and drywall would be a good idea. Especially in the winter. Make sure the garage door and all windows/doors are sealed well. Map out how you would like your electric like leaving 2 boxes near work areas. Does the garage have an open ceiling or is it closed off for storage? mabey you can get some pics up so we can get a visual.

  3. #3
    Join Date
    Mar 2004
    Location
    Goshen
    Posts
    5,929
    Quote Originally Posted by bobtsgt View Post
    insulation and drywall would be a good idea. Especially in the winter. Make sure the garage door and all windows/doors are sealed well. Map out how you would like your electric like leaving 2 boxes near work areas. Does the garage have an open ceiling or is it closed off for storage? mabey you can get some pics up so we can get a visual.
    Yea, I thought about that, and I will get some pics up tonight, to show you guys what I'm working with. It is an open ceiling, but I plan on closing it up with some plywood so we can have some extra storage room. There aren't any windows, and its a single car garage with a craftsman garage door opener.

    A welder could possibly be in my future as well.
    98 Cobra - Bolt Ons
    2017 F-150 3.5 EB

  4. #4
    Join Date
    Apr 2004
    Location
    Eastgate
    Posts
    6,161
    yeah if you insulate everything you will be nice and cozy during the winters. Plus the heater doesn't have to stay on for very long unlike mine

  5. #5
    Join Date
    Mar 2004
    Location
    Goshen
    Posts
    5,929
    Quote Originally Posted by bobtsgt View Post
    yeah if you insulate everything you will be nice and cozy during the winters. Plus the heater doesn't have to stay on for very long unlike mine
    Haha, thats a whole 'nother topic. The garage is detached though, so I would need to get a seperate heater for the garage....
    98 Cobra - Bolt Ons
    2017 F-150 3.5 EB

  6. #6
    Join Date
    Sep 2005
    Location
    fairfield
    Posts
    1,266
    Quote Originally Posted by 5.0calypso93lx View Post
    Haha, thats a whole 'nother topic. The garage is detached though, so I would need to get a seperate heater for the garage....
    Rick's(331twistedwedge) brother has one of those turbo heaters in his..It's ran on propane ..His garage gets pretty damn hot at times..We had it on this past Sunday while yanking my tranny out of Red Sled..You can also run the baseboard heaters..The wark damn good also...

  7. #7
    Join Date
    Nov 2005
    Location
    Dayton, OH
    Posts
    949
    Run your wire
    Insulate
    Drywall

    It is a lot easier to do it right the first time. I have to tear down drywall on 3 sides and a ceiling in my 2-car garage because the previous owners didn't care to put up insulation and the crap they put in the attic they just rested on the drywall. They didn't put up any planks.


    You have what, one 15amp fuse running from your main breaker out there? That is fine for lights and small tools. I would probably suggest a second line ran out to the garage for the A/C and welder.
    '10 Mazda3i - Wife's grocery getter.
    '04 Mazda3s - FML
    '00 Subaru Forester S
    '78 Pinto Cruising Wagon - on jackstands
    -Adam

  8. #8
    Join Date
    Jan 2007
    Location
    burlington
    Posts
    1,001
    start with wiring make you put more than you think you need cause you allways end up needing more
    #9 on the DD 2008
    my 10.86@ tri-state http://www.youtube.com/watch?v=ggtILfvmZF4

    VINNY..... YOU MAY BE GONE BUT YOU WILL NEVER BE FORGOTTEN!!!!!!!!!!

  9. #9
    Join Date
    Oct 2004
    Location
    Huber Heights
    Posts
    255
    Quote Originally Posted by 95turbocharged View Post
    start with wiring make you put more than you think you need cause you allways end up needing more
    I was gonna say the same, alot easier to run wiring and extra outlets without the drywall up.

  10. #10
    Join Date
    Feb 2004
    Location
    Cincy
    Posts
    4,679
    I am still finishing up a few pieces of my garage but I put 100 amp service out to the garage. Outlets every 6 feet 2 outlets in the ceiling for drop cords lights. 6- 8ft High output floresant bulbs From Home Depot. They are cold ballast and very bright. A Ceiling fan Helps with the heat too. I put up a 220 heater. I insulalated it and hung 7/16 OSB on it for panels. The osb is cheaper and you dont have to finish it if you dont want to. I might paint it in my garage. When you hang the drywall rent a drywall jack your back will thank you. I was putting up 4x8 sheets of osb 13ft in the air by myself with the drywall jack. A lot of the OSB I got for $ 3-$5 a sheet. Some I paid the going rate for $6.50
    I wish my lawn was Emo so it would cut itself...

  11. #11
    Join Date
    Sep 2006
    Location
    Fairfield, OH
    Posts
    729
    Quote Originally Posted by Timido View Post
    I am still finishing up a few pieces of my garage but I put 100 amp service out to the garage. Outlets every 6 feet 2 outlets in the ceiling for drop cords lights. 6- 8ft High output floresant bulbs From Home Depot. They are cold ballast and very bright. A Ceiling fan Helps with the heat too. I put up a 220 heater. I insulalated it and hung 7/16 OSB on it for panels. The osb is cheaper and you dont have to finish it if you dont want to. I might paint it in my garage. When you hang the drywall rent a drywall jack your back will thank you. I was putting up 4x8 sheets of osb 13ft in the air by myself with the drywall jack. A lot of the OSB I got for $ 3-$5 a sheet. Some I paid the going rate for $6.50
    So basically you're copying my garage setup? Hahaha. I ran a 100A service to a subpannel in the garage too. 220V heater, 220 for welder, lots of 20A 120V outlets, 7 4' dual florescent strips on the wall, insulated garage door, epoxy coated floor. I often work in my garage barefoot in the winter with shorts and a t-shirt on. I can help you out with the wiring if you need it, I bought a 2005 NEC book, and read the entire thing just so I knew I was doing it by code. I got a permit and got it inspected as well.

  12. #12
    Join Date
    Aug 2004
    Location
    Hamilton
    Posts
    200
    If you wanna use drywall, go over to lowes and look for the slightly damaged pieces. I mean, since it's a garage you may not care. They knock off a significant percentage, maybe 50? I forget but it's well worth it.

  13. #13
    Join Date
    Jun 2005
    Location
    carlisle , oh
    Posts
    460
    Let me know when you go to do the drywall and i might be able to get it for you at 1 to 2 bucks a sheet either at my work or dads!

  14. #14
    Join Date
    Feb 2004
    Location
    Springboro, OH
    Posts
    6,281
    Sketch out the dimensions on paper, lay out how you are going to run the wiring, where you want outlets, heater, lights, etc. Are you going to have a workbench? You will want outlets there too. After you sketch it out, figure out how much wire and how many outlets you need for it. then run your wiring, do your insulation, hang your heater, and put up your drywall or other wall covering. As for your cieling, how far apart are your joices? That can be a pain if you want to hang drywall and insulate it. Where do you live? That would help volunteers to know how far of a drive it is to help you out.

  15. #15
    Join Date
    Jun 2006
    Location
    The Dirty Natti
    Posts
    2,493
    Hey man if this is something that interests you, I can get you a healthy line of credit setup at Lowes, were running 12 months same as cash on our consumer card (lower approval amount) or 6 months same as cash on our project card (high approval amount).

    Also, I can refer you a quality General Contractor who is affordable if your interested for the parts you need help with.

    Take some pictures of the place too and post up.

    Good luck!

  16. #16
    Join Date
    Jun 2006
    Location
    The Dirty Natti
    Posts
    2,493
    Quote Originally Posted by ewalt View Post
    If you wanna use drywall, go over to lowes and look for the slightly damaged pieces. I mean, since it's a garage you may not care. They knock off a significant percentage, maybe 50? I forget but it's well worth it.
    Yea thats true for the most part.

  17. #17
    Join Date
    Apr 2004
    Location
    Cincinnati, Ohio
    Posts
    4,839
    Hi
    if it was me, after I finished the wiring, I would put drywall on the ceiling and plywood or something on the walls then I could hang stuff on it... as well as insulating of course.. and flooring center part of the overhead.
    A pulldown ladder to the upstairs would help also.

    The big problem I see is getting enough electric back there?? I trenched mine, put it in a pipe and also ran gas out there for a heater...
    If you just have a 15amp, going out there say a 12/3 wire going back there, it would be good for lights and small tools but that is about all. Enjoy the garage.. Figure what you want and go from there, as far as the electric I would get a small breaker box and run everything from there, even if it is only a 15amp service coming in, then you will have things seperated in to different circuits, when/if you run more power back there.

    Have fun, plan out what you want and ask for help

    Pops
    "Socialism only works in two places: Heaven where they don't need it and hell where they already have it."
    -Ronald Reagan

    Steve owner of a blown '94 Vert.

  18. #18
    Join Date
    Nov 2005
    Location
    Dayton, OH
    Posts
    949
    Pops, I guestimated he had a 15A, he hasn't checked it/replied yet.
    '10 Mazda3i - Wife's grocery getter.
    '04 Mazda3s - FML
    '00 Subaru Forester S
    '78 Pinto Cruising Wagon - on jackstands
    -Adam

  19. #19
    Join Date
    Feb 2005
    Location
    West Chester
    Posts
    20
    Thanks for all the replies guys, I'm not really sure where to start. I have a buddy who is an electrictian so when I get some time, I'm gonna try and have him come out and look at the place. I like rscoupe's idea about drawing up how I want everything.

    As for the wiring and whats already there, I couldn't even begin to tell you.

    I'll try and get some pics up ASAP.

    5.0calypso under my g/f's joke of a sn, hahahahhaha.

  20. #20
    Join Date
    Mar 2004
    Location
    Goshen
    Posts
    5,929
    As promised, here are a couple quick pics I just snapped of the garage:









    This is a pic of the only wiring I see going into the garage:



    And here is a pic of the ceiling so you can see how far apart the joists are:



    I live in a condo, so its a two car garage in one building, but we own half, and the neighbors own half. The problem is, is that the garage is open above the dividing wall, so if they wanted they could just come over into our side. So I plan on putting up something to close that off.

    Just looking for some planning ideas mostly here, as I won't be able to start working on the garage for some time. I just want to get a heads up on what I'll be getting into, and how to go about it, so it will be done right the first time.

    Thanks for your help guys!
    98 Cobra - Bolt Ons
    2017 F-150 3.5 EB

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •