Need parts for the Stangbangerz.com Pinks Build please help if you can

**ibstrokin** · 03-18-2007, 11:21 PM

Originally Posted by kennebellcobra

Don't know your plans on the control arms but I have a set of mac upper and lca that needs bushing in the uppers if your not going solid.

depending on diameter of the hole, I may have some bushings for them.

**Demented5oh** · 03-19-2007, 05:37 PM

Originally Posted by MFIELD

If he wants them you could get them to me and i will deliver with the rear axle.

That sounds good to me. Just waiting for a PM or something to know if they are needed or not

**replicobra** · 03-21-2007, 10:58 AM

hey, i just remembered i also have some sn95 rear springs. they are shorter and stiffer than a fox's. they picked my 60 fts up a tenth, by themselves. i'll throw them in.

**89notch** · 03-23-2007, 05:32 AM

A little update for everyone

I'm working with Dynamic Transmissions on putting together a C-4
I think JW is going to come through with an ultra Bell
Autometer said they would contribute gauges
SX is sending a regulator fuel pump and filters
VS Racing confirmed an intercooler and are still working on the masterpower T-70 turbo

The major hold up right now is the engine I'm waiting on some returned calls right now but hope to hear back today

**89notch** · 03-23-2007, 09:19 AM

Also Champion fiberglass just came through with a hood of our choice

**DeckerEnt** · 03-23-2007, 12:18 PM

Looks like everything is coming together well. Is there a date set for the race? When does the car need to be ready?
Keith

**Black92LX** · 03-26-2007, 02:55 PM

My Amsoil Connection is interested in possibly dontating some stuff.

I might be interested in providing all the lubricants for the car, let
me know exactly what you need and how it is going to work out. If you
guys pass my name out to get me out there, I would supply the oil,
tranny fluid, filter, gear lube and maybe throw in some mothers for it.
http://www.milwaukeesynthetics.com/

Just got the email from him. Also sent you PM so we can work out some details.

**rally** · 03-26-2007, 06:19 PM

hey if the car needs cleaned and polished after its all painted let me know.
( I detail cars)

**plated** · 03-30-2007, 10:26 AM

just talked to my buddy at smyth paint center in mt.carmel he is paying the bill for paint& material for the car

**93hulk** · 03-30-2007, 01:39 PM

Originally Posted by platedturbonotc

just talked to my buddy at smyth paint center in mt.carmel he is paying the bill for paint& material for the car

Sweet. We got it all gutted the other night. Kelly is goin to post some pics when he gets a chance.

**89notch** · 03-30-2007, 01:41 PM

Timido came over last night and took the dash out of her its ready to go to rigid.

Also Trickflow came through big time by donating a set of "R" heads and a matching R lower and boxed upper intake. I have some pics I will post when I get home tonight

**Gregg@TFS** · 03-31-2007, 09:57 AM

That's right and this car better kick some butt!!!!!!!! I will be there when it happens so you guys better keep me posted on what is going on.

**BIZLE** · 03-31-2007, 10:44 AM

Originally Posted by platedturbonotc

just talked to my buddy at smyth paint center in mt.carmel he is paying the bill for paint& material for the car

i will help on the paint and body keep me posted chris

**Timido** · 03-31-2007, 11:18 AM

Last I heard a Fellow Stangbanger was really stepping it up in the Engine Compartment. Perhaps a little small block to put all that Trick Flow Bling on!!!

**FlatlineCowboy** · 03-31-2007, 12:34 PM

can we make cash donations for this? Possibly setup a paypal account where we can make deposits?

**89notch** · 03-31-2007, 12:53 PM

Originally Posted by Timido

Last I heard a Fellow Stangbanger was really stepping it up in the Engine Compartment. Perhaps a little small block to put all that Trick Flow Bling on!!!

Yep our local dayton 5.0 has stepped up to the plate with a large donation of a complete shortblock for the car. I'm working on a write up for everyone that donated to the cause.

**Jeff88coupe** · 03-31-2007, 04:47 PM

Sweet...major kudo's to Mike for the shortblock. I was sitting here thinking of how a set of tfs-r's would fit on a stock explorer shortblock. Is it still going to be a 8.2" deck block.....or a 9.5? Those R's would be nice on a windsor.

**Timido** · 03-31-2007, 07:54 PM

Those Trick Flow heads will work Great on the little Small Block

**Timido** · 04-06-2007, 03:06 PM

There are alot of great people that are Giving alot of time and parts to this build. There have been several people asking about donating a few Bucks to the cause well this is what we have worked out. For the Cincinnati folks I have asked CincySpeed if they would keep a running Tab of Donations that we will be able to use for parts. All donations will go to parts for the build.

CincySpeed 513-821-2221

**BUHBYY** · 04-06-2007, 05:20 PM

I have a hurst quarter stick and cable and Trick flow valve covers to go on those sexy heads ....

Thread: Need parts for the Stangbangerz.com Pinks Build please help if you can

Thread Tools

Display

Thread Information

Users Browsing this Thread

Posting Permissions